paul turner 250r pipe

[dizasterzrfun69]

Hey guys i bought a paul turner pipe with a fatboy2 silencer but im not sure which pipe it is. I think its the high rev because it says ATC HR. Does anyone have a high rev they can check to make sure this is what i have? I looked on their website and still cant figure it out :crazy:

Kevin

[Fox250R]

thats a highrev yes! One of the best if not THE BEST pipe on the market for a 250R...Enjoy!

[oldsking86]

Yep that's the one! Idk if it's the best though my Bill's pipe has a serious expansion area and just screems over on the top end, it looks bigger then the HR too. You still can't go wrong with that pipe man great buy!!

[dizasterzrfun69]

thats what i thought it was. Cool beans :w00t: I won it probablly 1 or 2 months ago and its just been sitting around waiting on my 85 r project to start and come together.

[350Kris]

How do the 250R pipes rank??? How would you rate the following and why?

FMF Fatty
Paul Turner High Rev
Bill's Pipe
ESR ATC 5
Others?

I currently am running an FMF Fatboy and Powercore...am I missing out???

Thanks,
Kris

[dizasterzrfun69]

How do the 250R pipes rank??? How would you rate the following and why?

FMF Fatty
Paul Turner High Rev
Bill's Pipe
ESR ATC 5
Others?

I currently am running an FMF Fatboy and Powercore...am I missing out???

Thanks,
Kris


I dont know about the 250r pipe cause i havent ran any of them yet but id say your missing out. I've ALWAYS heard that fmf is just barely a step out of stock. thats just what ive heard...maybe someone with some experience can verify

[deathman53]

I have a pt hi-rev, esr atc 5 and had fmf fatty. The fmf pipe was great for low-mid, the esr pipe was a huge difference, same bottom, but alot more mid-top, the pt hi-rev I use now, has some bottom but a screaming mid-top. You can't foget that dg makes a pipe also, I hear those are stock replacement w/o much gain.

You can't go wrong with a esr pipe for anything, for open riding pt hi-rev, tight woods pt type 6(I had one on my trx250r, bottom - mid it ripped, little top end). The fmf I would rate at the bottom next to a dg pipe. Fmf and dg in my book are stock replacement.

[350Kris]

I've heard that too, but I've never run anything else (my 250R came with it). I'm sure someone will have some insight.

[Billy Golightly]

Current day pipes in order from best to worst (peak hp wise) that I know of.

Paul Turner High Rev
ESR ATC5
Paul Turner mid range
FMF
DG
Stock


Theres a TON of oldschool pipes out there like the Bills, CT, LRD, Klemm, PSI, Phase Five, Power Pros, etc. I wish there was a way to get a bunch of them together for a dyno shoot out sometime.

[deathman53]

I tried to get a lrd pipe, they didn't have enough people that wanted them, they are having a hard enough time to get trx250r pipes made.

[350Kris]

Billy, where would the Type 6 fit into your ranking?

[ScottZJ]

Personally Type 6 is #1 on my list. It just fits woods riding to perfection. If you are looking for top speed and flat out top end power, the High Rev is the best. I have the Type 6 with the ESR silencer and I feel that is the best combination for the woods that you can buy.

[Billy Golightly]

Which one you mean Kris, the Paul Turner? Its right under the ESR.

[350Kris]

Sorry Billy...confused myself! I see what you mean now.

[350Kris]

ScottZJ -- why the ESR Silencer over the PT Fatboy?

[RoscoW]

I've noticed this seems to be a fairly frequently asked Question about pipe Identification and there seems to be a lot of different pipes out there. Is it a worthwile idea to do a sticky on identifying a pipe brand. If people could post pictures of a known pipe from a couple different angles and label what brand' it is, I think it would be a good source of information for those of us who don't know.
Just thinking out loud:D

Ross..

[brapp]

this is the paul turner high rev.


http://w1.bikepics.com/pics/2005/01/29/bikepics-281730-full.jpg


this is the fmf gnarly but dont hold me to it.


http://w2.bikepics.com/pics/2006/11/03/bikepics-714782-800.jpg




in my own oppinion the fmf is a better wood spipe but dosnt pull as hard on the top and the pt high rev is the baddest pipe i ahve ever run on a 250r trike, i can clearly feel the diffrence and its what i was runnign on my r at trikefest and i wasnt far behind the 500's

[jason85atc250r]

i think i have the one on the 2nd 250r in brapps picture. it looks the same.