Any one know a source for wheel spacers for a Kawasaki KLT110??

[900EX]

I have been looking for a set of wheel spacers for my KLT110, but have not had any luck. All I have found are the screw on stud spacers. These kinda scare me. Any one ever used these? I am afraid of them coming loose, or breaking off. It just needs to be a little wider.

[cr480r]

Is the pattern 4/4? If so durablue makes 2.5", so does UM products, Highlifter products makes some real nice 1.5" aluminum spacers that bolt to the existing studs. I see used spacers on ebay all the time also.

[Gunnar]

Alot of the polaris's have the 4/4 bolt pattern so maybe you could find some for one of them. Scrambler, trail blazer/boss, cyclone and others

[900EX]

Thanks,
If I remember right it is 4 lug, by 100mm. But uses the bigger studs. Not sure what size the studs are. I need a metric pitch gage.

[Gunnar]

check here------------ find the bolt pattern of yers than somthin that will work

http://www.mud-throwers.com/atv_wheel_chart

[cr480r]

I was thinking about trying these 3" spacers on my tecate project.
http://www.golfcartgiant.com/tireswheels1.html

[900EX]

Those might work. I need to look into those. Thanks! Boy we are finally going to get above freezing this weak! Come on spring!