My Tri-shed pics

[ssskipeee]

heres a few pics of the tri-z before i took the head off

http://i179.photobucket.com/albums/w289/ssskipeee/SP_A0069.jpg
http://i179.photobucket.com/albums/w289/ssskipeee/SP_A0068.jpg
http://i179.photobucket.com/albums/w289/ssskipeee/SP_A0067.jpg
http://i179.photobucket.com/albums/w289/ssskipeee/SP_A0066.jpg
http://i179.photobucket.com/albums/w289/ssskipeee/SP_A0065.jpg

check out the dodgy rear hubs

[nouseforaname90]

What is up with those? Did someone take out the middle portion of a rim and weld it to a larger diameter rim so that the bolt holes matched up?

[ssskipeee]

no the hubs are actually drums which are either from a car or a different quad as the wheels are not the correct ones either

[ceaserthethird]

Lot's of work to be done ... e-bay

[mnnmaz]

Sweet! was it cheep? I love it!! :D

[ssskipeee]

swapped it for a 93 lt80 in bad shape at night the only decent thing about the lt was it ran everything else was shot i even used a socket as a chain tensioner as the back end was bent and the chain was too loose.

[ATC-Eric]

Pretty decent lookin Z. With a bit of elbow grease that thing will shine!

Your radiator shrouds apear to be in great shape too!

[ssskipeee]

the shrouds are not too bad a few minor cracks, the fenders are a mess though.

the exhaust is not too bad it was joined by some silver tape which was a mess and the tail section held on by cable ties but all in all still useable.

the pegs however were bent and the right side broke off after a few kicks with the wrong kick start it came with.

i originally planned to just get it running and sell it but its looking more like a restoration project than a quick sale.