PDA

View Full Version : Will any newer key switches like 450r fit 250es



dufrain
01-26-2007, 04:51 PM
My 86 has some junk Ignition ket switch rigged into the dash.It has went bad and I need a replacement.A new ignition switch from the local place is about 80 bux.They go pretty high on ebay also.
I saw alot of 400ex and 450r ignition switches pretty cheap on ebay.I was wondering If anyone has wired one of those up on a big red.The junk one that on there now has only two wires so it doesnt kill the motor when the key is switched off.thanx

dufrain
01-26-2007, 09:14 PM
anyone tried this

Dave223
01-26-2007, 09:38 PM
Heya,
I have 2 -300exs, both ignition switches are also 2 wire. On the 300s, you can unplug the ignition wires and plug them together to make it run.Hope this helps. I also have an 85 for parts with the ignition switch on it, dunno if it works but it turns with the key. The key isnt honda either. Dave

dufrain
01-26-2007, 09:41 PM
Is that parts trike ignition a stock one with a replacement key

ClayW
01-26-2007, 09:41 PM
The stock 250ES keyed ignition is still available from honda for about $35. :TrikesOwn

deathman53
01-26-2007, 09:44 PM
if you have a kick start bike, you can use a crf50 key switch. I have those on my bikes.