Flywheel puller

[BigRedBlair]

Anybody have a Honda flywheel puller?
I'll pay for the shipping both ways if you will lend it out.
Or it may be cheaper to buy one if I could find one.
Part # 07733-0020000

Any ideas?
Need to pull the flywheel off a 85 250es.

[dreadhed]

On ebay they are cheap.

[BigRedBlair]

http://cgi.ebay.ca/Honda-CR-ATC-250-R-XR-250R-Odyssey-Flywheel-Puller_W0QQitemZ220070275070QQihZ012QQcategoryZ439 77QQssPageNameZWDVWQQrdZ1QQcmdZViewItem


Can't find one that says 250es/sx
This one say 250 r but not sure if it is the same?

[dufrain]

Look in the dennis kirk catalog in the puller section to find the thread size and pitch ,then go to napa or a bolt selling place and buy a hard bolt.It will work fine and cost about 2 bux.grease the tip of the bolt when you pull the flywheel.

[TimSr]

Anybody have a Honda flywheel puller?
I'll pay for the shipping both ways if you will lend it out.
Or it may be cheaper to buy one if I could find one.
Part # 07733-0020000

Any ideas?
Need to pull the flywheel off a 85 250es.


Are you sure its a flywheel puller you are looking for? Im looking at the photo you posted, and its showing the two clutches.

Two stroke pullers rarely, if ever, work on 4 stroke, oil immursed flywheels. 250R is not the same.

Denniskirk.com

Dennis Kirk PN# 28-1977 $10.99 20mm x 1.5, right hand

[BigRedBlair]

opps posted the wrong pic.
Thanks guys I found one localy wasn't easy
Cheers