Carb rebuild on a 185s...

[focuzzn]

Is it difficult to do?
do I need a kit to rebuild one? And is there a rebuild kit available for it?
Mine has no idle.
Any thoughts

[84honda200s]

yea there is rebuild kits. you can get them threw dennis kirk, e-bay, and any atv shop. just ask for a rebuild kit for a 22 mm Keihin carburator. or tell them a 185s. they are pretty simple to do. it getting it all tuned back in that can be a pain.

[chris200x]

But yes there is. I just ordered a rebuilt kit for mine today from my local dealer. $14.95 and comes with everything you need.

One important thing to remember is to count the number of turns the air screw and idle are turrned out before replacing them. (this means turning them all the way in and counting the turns before turning out) This way you'll have a good starting point after you got everything back together.

If you don't have a manual let me know and I'll post up the carb specs and diagram here on the board for you.

[focuzzn]

If you don't have a manual let me know and I'll post up the carb specs and diagram here on the board for you.
I have a clymers manual. Will this do?
Where are you in this state of Confusion?

[chris200x]

I have a clymers manual. Will this do?
Where are you in this state of Confusion?

Yeah the Clymer helps alot (in most cases)

I live right outside Hazleton, Pennsylvania. ;)

[dickieg89]

The clymer manual is the way to go.
I think I found all my carb kits for around $16 on ebay.

[focuzzn]

Thanks for the info.