need help tightening the chain

[trikeman]

after i loosen the 2 back bolts on an 84 250 r what do i do to tighten the chain?

[86350X]

If its the same as a 350x you need to turn the entire bearing carrier, there should be holes on one side of it yhat you can put a tool in to turn it, good luck

[200x Basket]

dont beat the carrier with a screw driver!!! put the screw driver through the sprocket and rotate the tires to push the screw driver and move the carrier.

[trikeman]

ok thanks guys

[86350X]

Did you get it adjusted ok? What did ya do, let us know

[trikeman]

no i still cant get it :(

[skippy]

do you have a bolt in the center of the rear of the swingarm? if so, remove that and loosen the two outer bolts,, and then pivot the carrier!

[trikeman]

yea i tried it but i'll try again