points

[dakywaky]

does anyone know how to set up the points on an 83' atc110, and how do you do it , thanx

[plkmonster2]

take off the cover, then you have to have the engine running, if you see spark, you need to space the points out a little bit. there is two screw that should unscrew, then use a screwdriver, and open then up a little using the knobs on the case. for a good starting point for the advanve is to loosen the screws on the outside, then on the right side there is a piece of metal that sort of points to a large notch in the assembly. set the metal thing in the middle of the notch, and adjust from there

[wanta250r]

I thought the 110 didn't have points, I'm not to sure though

[plkmonster2]

yeah, it does, there right before the cam