Tri-Z Front caliper.....Will anything else substitute?

[bassman]

The front caliper is cracked on my Z, and I can't seem to find any on ebay or on the forums. So I need to substitue.

[maggiesboy]

Bassman, I think I have one in my box of spare parts. I'll check after work tonight and get back with you.

[Kintore]

Contact Slothminx on here about it,


edit im bored and im a nice person, I pressed the search button for you and found the thread- Clicky here (http://www.3wheelerworldforums.com/showthread.php?t=47937)

[TRIZTUNES]

HI,
yes front caliper off of a RT 350 dirt bike is the same.




THANKS

TRIZTUNES!!!!!!!!!!

[maggiesboy]

sorry man, I only have a spare rear caliper :(

[slothminx]

Rear and front are the same caliper

[TRI-Zbrian]

this may help you out a bit with others problems in that nature as well...

http://www.3wheelerworldforums.com/showthread.php?t=16277

if any of you have any other ones for it please pm me i want to keep it as up to date as posible....

[maggiesboy]

Rear and front are the same caliper


I stand corrected..... I have a caliper :D:Bounce

[03 ORANGE SHEE]

z front rear are the same, as is 87-89 banshee front

[Bryan Raffa]

but dont you have to use the right side caliper so the bleeder is on the top?

[TimSr]

The old style Banshees are NOT the same, though they look it. The pistons are slightly different size, and the bracket does not match. One side (cant remember which one) will work for a TriZ rear, but the line connection is at a different spot, and you must pull the mounting bracket part from your Z caliper, and put it in the Banshee one. The other side wont work at all in the back, and neither side will work on the front due to the angle of the line connection.

[maggiesboy]

I still have a caliper...