Question/Help ATC 250R / 350X 4inch Extended Swingarm

[sportvette]

Hi everyone,

I am looking to buy a 4 inch extended swingarm for the 250r. Does anyone know what size chain I will need after installing this? How about the brake line...where could I get a larger brake line?

Thanks for your help.

[sportvette]

well, i just picked the extended swingarm up off ebay for $104. anyone know the sizes for the brake line and chain extensions?

[ATCRYDER]

I saw that one on eBay. Pretyt good lookin. Got too high for me after about $60 though. =(

As for your questions....youre obviously going to need a brake line thats 4 inches longer than stock....and a chain that has 4 inches of extra links.

[sfynks]

actually.....the chain needs 8 inches of extra links.....or so i would think

[KASEY]

i have a 6" over stock swingarm on my 250 and i used the stock brake line ,,,,,, its looped around in the front and all i did was reposition it on the master !! ,,

[als250]

sportsvette, jlatvproducts.com has S.S braided ext. lines(red,blue,black) for about $50.00. They also sell chain (D.I.D.) in various (link) lengths.

Al

[sfynks]

dude.....i didnt make the topic.....i just posted to it...heh

[als250]

oops, :oops:

Al

[sportvette]

thanks for the info everyone. ill check out the stock brake line, as someone suggested that it is looped around, and will fit when re-routed.

for the chain length, ill try putting the chain on, so that the open part of the chain is by the rear sprocket and hopefully i can count the links that i will need. speculation isnt going to help me here, since i need the chain length in links.

thanks.

[trikerooster]

I can't find any extended swingarms on EBAY. I need the whole setup with the swingarm, shock, and Linkage. For 84' 250R. Can anyone help me?

[trikerooster]

People keep telling me to leave the swingarm alone. What is too long?
Isn't bigger better??

[Red Rider]

for the chain length, ill try putting the chain on, so that the open part of the chain is by the rear sprocket and hopefully i can count the links that i will need. speculation isnt going to help me here, since i need the chain length in links.You will need a chain that is 8" longer. You could measure on your current chain how many links are in 8", and then add that many links to your current chain. Or, you could measue it the way you described. If you do it that way, be sure you have the carrier set to the center (equal amounts of chain adjustment tightening/loosening available), then count your links needed.