Z is Almost Rolling....

[MTS]

Well after alot of money, Beer, and cusing the Tri-z is fineally coming togther, this started as a complete Basket Case, and pretty much had everything but the Frame replaced on it, its a 85' but im running a Recent Rebuilt 86 6 speed, has a little porting and the head shaved down a tad, for now, Running a 39mm PWK and a DG pipe, Completly Went though this thing, New swinger bearings, Carrier, Steering, Fork Rebuild, New rear shock (not pictured) a Billit kit from ronnie (not pictured) new bars, sprockets, chain, Rims and tires ( not pictured) new plastic, Twist thottle, Lots of polishing, and paint..........Almost there! Future plans are a Big bore Stroker With Some Radical porting, and Bottle fed, Gota Smoke all dem Big bore 450's round here out on the ice.....:beer
http://img55.imageshack.us/img55/3848/triz001du8.jpg
http://img211.imageshack.us/img211/649/triz002aq5.jpg
http://img211.imageshack.us/img211/1430/triz003rh6.jpg
http://img70.imageshack.us/img70/2982/triz004kn8.jpg
http://img120.imageshack.us/img120/5968/triz005ff2.jpg
http://img471.imageshack.us/img471/7674/triz006ks1.jpg

[Yamahondaman]

39 PWK ....... YUMMY !!!!! look'n Good .!!!! Post some pic's as you go !!!!

[ghostridermb]

Lookin good Joshua

[firecat]

looking good josh .Im going through the same process.my z is coming along slowly but this spring it will be worth all the time and effort i put into hereis a before and after pic it belonged to somebody on this site im not sure who though.

[MTS]

looking good josh .Im going through the same process.my z is coming along slowly but this spring it will be worth all the time and effort i put into hereis a before and after pic it belonged to somebody on this site im not sure who though.
Yea it takes time and $$$ iv been collecting parts and whatnot for the last 2-3yrs....dont have any before pics, on my old PC witch blew up....:lol:

[jason 32]

great eccept -your killin me with the orange rtv sealer!
shellac would have been better , or a lil grease

[Bryan Raffa]

great eccept -your killin me with the orange rtv sealer!
shellac would have been better , or a lil grease

or Yamabond! lookin good its about time your gettin closer!

[MTS]

great eccept -your killin me with the orange rtv sealer!
shellac would have been better , or a lil grease
Hahaha, Yea i know......Now theres a story Behind that.....me and a few buddies and and some beer.....But its coming off Just been Little lazy......:lol: :beer

[Mosh]

Looking good.what shock is that on there??? and what shock link are you using???

[Derrick Adams]

RTV silicone is not compatible with gasoline and if you run that engine with the intake sealed like that watch for an air-leak shortly after. Be careful because you can easily go lean enough to grenade the top-end.

Looks like it's going to be a sweet trike when your finished!

[MTS]

Looking good.what shock is that on there??? and what shock link are you using???
Thats the old Stock shock...the link isnt on properly i need to order new bearings for it yet, just kinda threw it togther, Plan on getting a 01 raptor shock or something of the likes....

[Bryan Raffa]

BOY MTS...You need to talk to Ronnie!! Bling Bling..

[MTS]

BOY MTS...You need to talk to Ronnie!! Bling Bling..
Allready Did!!! its sitting in the garage....got More of it on, just havent taken a recent pic........BLING!!:naughty: Fergot to mention its got the RH lightend Rotor on it too for thta little Extra ZIIIIINNNGGGGGG!!!

[Yamahondaman]

HOPEFULLY i can get it to you Before it's all done ....
i made MORE "Thing's" !!! :naughty:

[MTS]

HOPEFULLY i can get it to you Before it's all done ....
i made MORE "Thing's" !!! :naughty:
More "Thing's" !!!! GIT IT RAAAAAAAAAGGGGG!!