Cross Referencing our Trike parts

[sandpuppi101]

We all know that the ATC 185 and the 200 models are virtually the same ,and the TRX and ATC 250R's ,share some of the same components and the tri-z's are mirrored 3 wheel conversions of the YZ's to some degree and the same for the Tecates and the KX's ! How much are each brand alike and ,if you guys wanna get a few cats out of the bag,I thought it would be interesting to find out what you have cross referenced from different machines and found were the same part # and or found that worked !! Say for instance I have an '85 250SX ,What exactly can be crossed over to a '85 Big Red??? Are the radiators on a YZ the same as a Tri-z ?? Do The ALT110 and the some others share the same frames???:wondering

[cragster]

86-87 200x Topends interchange with fat cat and trx200sx top ends. TRX350D top end can be used on a 350x. 86-87 200x rear hubs are the same as trx300ex and 400ex and 450r i belieive. Im pretty sure you can use an 01 raptor 660 brake disc on a 200x. The 83-85 200x uses the same top ends off the xr200r. You can put the XR motor in it for a hotter cam and 6 speed trany. Im pretty sure the CRF230 bolts into the 83-85 200x also. A early 200x seat is almost the same size as the later model. A 300ex/250x motor is almost a direct bolt up to a 350x frame. There is some internal parts that swap frpom a 300ex to a 350x, a shift fork possibly.????? A 350x grab bar is the same as the early 200x.
Umm thats about all i can think of ATM

[cragster]

One more thing! How could i forget. A 185s/185/200s/200 motors go into the 200x frame for an AUTO X.

[sandpuppi101]

The 350X grabbar cross reference to an older 200X!!! I never knew that!!

[cragster]

yep sure does!

[gravelord]

you said 86-87 200x can use 300ex/400ex hubs, actually the earlier year 200x's were able to use the 300ex/400ex hubs, and it gave you + 1 1/2 inches in the rear! i know this because i did it with my 84 200x :) great setup, definately buying better then wheel spacers. the 200m/200es heads i believe were the same as the early model 200x's, and yes the xr200 engine SINGLE CARB years will bolt directly into the early model 200x's, but its a backwards kick so beware, youll have to cut a fender. this isnt a cross reference - but my buddy DeathMan on the forums here, he put a 250r front end onto his 200x. great setup, if i think of anything else ill let you guys know

BY THE WAY - will a kx250 motor bolt right into a tecate 3 ? and will a yz250 engine bolt directly into a tri-z ??

[cragster]

Yes im pretty sure yz250 goes into triz. Also a yz490 goes directly into a triz