PDA

View Full Version : question about atc hubs?


rugabugadouglas
10-21-2006, 06:54 PM
hi im new to this site and i was wondering if a rear hub off a 200 or 250 would fit on the back of a 110? i am trying to put aluminum rims on he rear of my 110 and they are hard to find used in a 130mm bolt pattern. any help would be great and if any one has some for sale that would be cool too!!
Howdy
10-21-2006, 08:09 PM
The axle splines on these machines are the same ( the hubs are different bolt pattern than others ):
ATC70
75-78 ATC90
ATC110
ATC125m
ATC185
ATC185s
ATC200
ATC200e
ATC200es
ATC200m
ATC200s
83-87 ATC200x 4/110 ( 86-87 style set the tires 2" out per side. 4" total added width )
81-84 ATC250r
1986-87 Tecate

And these 4 wheelers ( That I personally know fit ):
200sx
300ex 4/110
400ex 4/110
I know there are others but can't think of them right now.

Howdy
Unclediezel
10-21-2006, 08:32 PM
Hey Howdy, any shot of you making a YAMAHA Chart like that? Not trying to Jack the thread, But Ive tried Hi and Lo to find someone who knows Yammy interchanges like that one.
hondahaulic
10-21-2006, 08:41 PM
i have yamaha 225dx hubs on my honda 200s, so you would be able to use those too. (but they are 3 bolt, probably impossible to find 3 bolt aluminum rims). I have heard of guys putting banshee hubs on a 225dx, but im not sure if all year banshees are the same.
Unclediezel
10-21-2006, 09:17 PM
(but they are 3 bolt, probably impossible to find 3 bolt aluminum rims). .

Exactly my dilemma!
TimSr
10-22-2006, 02:31 PM
Hey Howdy, any shot of you making a YAMAHA Chart like that? Not trying to Jack the thread, But Ive tried Hi and Lo to find someone who knows Yammy interchanges like that one.

I have yet to find a Yamaha that the hubs will not interchange with each other, besides the small splines on the Zinger and the Raptor 80's and 50's. Warrior, Banshee, and Blaster/Triz all fit my YT175.
Unclediezel
10-22-2006, 06:52 PM
Thanx Tim.....
TravEX
04-29-2008, 08:59 PM
Bump, to a very helpful thread. Searched for it to see if I can swap 200X hubs to my 185S.
RamsesRibb
09-03-2016, 09:38 AM
Yamaha for sure is the same. I have an aftermarket banshee axle on my Tri-Z that just went on normally and I use the Z hubs.