200m engine in a 185s frame, does it fit?

[thefox]

Can I put a 200m engine in a 185s frame? I figure the starter motor will get in the way but by how much? Could I just dent the frame to make the clearance I would need?

[team-red-rider]

yep it should fit im about 85.9%sure

[Russell 350X]

It can work,you just need to dent the frame where the starter goes. You'll need to make a battery box, mabey on the frame under the grab bar.

[burnoutboy]

I have done this swap. You can either remove the starter motor or dent the frame. A very slight dent in the frame is all that's required.

hope this helps ya.

[thefox]

Cool that is what I needed to know. Thanks guys!