PDA

View Full Version : 84 R Question


atctim
10-01-2006, 12:09 PM
Will the engine come out of a 1984 250R without pulling the swing arm bolt out? I have all the bolts out of the engine mounts, and the whole top end off the motor, and I still can't get it out. Help!
Howard
10-01-2006, 01:38 PM
no, on the 84 that swing arm bolt goes through the very back of the motor case. can't get it out without taking the bolt out.
max
10-01-2006, 06:43 PM
He's rite tim. Yanker out
atctim
10-01-2006, 07:40 PM
Problem is - it is siezed big-time...... Is cutting it the only way to get it out? How have some of you guys dealt with frozen swinger bolts?
Howard
10-01-2006, 07:45 PM
any of mine htat have been some what frozen would never come out until i cut it.
atctim
10-01-2006, 08:52 PM
Howard -

where did you cut it, and how? I am thinking a saws-all with a long blade - but what are the access points? Do you needa special blade for the hardened bolt? It looks like I will have to cut it in 4 places? is this true? Please let me know.
Howard
10-01-2006, 09:10 PM
from what i member on the air fooler just every spot you can get a blade in, yeah sawzall.