honda 200s hub size

[84honda200s]

what is the stock lug distance on a 84 honda 200s? i am getting new rims but i need to know the lug pattern. i know it is 4 lug but they give me tons of diff. 4 lug pattern like 150mm 156mm 115mm and so on. i am stuck ! i am not going to eventhink about ordering if i cant figure out what danm size they are. why the hell do they need to make so many diff. size hubs for?? i understand the bigger trikes put out morepower. but do they really need to make tond of freakin hubs? please help me.

[jason85atc250r]

your 200s is 4x130mm is the bolt pattern for the wheels.

[84honda200s]

thank you man you just saved me 300.00

[TravEX]

yes, 4/130.

[84honda200s]

thanks guys i knew this was the best site ever. 3ww forever

[84honda200s]

why is dennis kirk saying item number 551051 fits when its a 150mm 4 bolt pattern? im really lost now. i have a 130mm 4 bolt and ther saying i need 150mm. i can order the 110/130mm 4 bolt there only 30.00 but they are only 8 inch rims i want 9. i may just have to settle for stupid 8 inch rims.

[TravEX]

are you wanting 8's or 9's?

[Howdy]

why is dennis kirk saying item number 551051 fits when its a 150mm 4 bolt pattern? im really lost now. i have a 130mm 4 bolt and ther saying i need 150mm. i can order the 110/130mm 4 bolt there only 30.00 but they are only 8 inch rims i want 9. i may just have to settle for stupid 8 inch rims.

They may have it listed with the ATC200 style. The Standard ATC200 used 4/150, but the ATC200s used the 4/130.

Now if you really want 9" rims you could use ATC185, ATC200, ATC200e, ATC200es hubs ( 4/150 ) and rims. The axle splines are the same.

Another option is to use 86-87 200x, 300ex, 400ex, hubs and rims ( rear ). Again the axle splines are the same. You would gain a little width due to the hub style.
Howdy

[ATCGENIUS]

The 200s bolt pattern is 4 on 150mm, but dennis kirk does have them in a 9 inch wheel and is the same price as a 9 inch wheel in 4 on 110mm, which is the big red, 350x, 200x. 250sx, etc. now where you can save some money, if you had a set of hubs with the 4 on 110mm, then a 8 inch wheels are only $27 each. but you want 9 inch and dk has them in the 4 on 150mm, so i think you have your wheels, the wheels are by AMS part# 55-1051 and are $43 each. of course for this price they are steel. i hope this helped.

[84honda200s]

it does a little. so if order part number 55-1051 and it dont fit my hubs do any of you have a spare pair of 4 bolt 150mm hubs you would sell me?

[ATCGENIUS]

are you not sure if you have 4 on 150m? do not order any wheels until you verify that the hubs are the oem factory hubs for a 200s, 4 on 150mm. go to a tire shop and take a wheel with you and tell them you want some wheels, let them measure and tell you if they are 4 on 150mm, because like someone in this post said that the splines are identical and they are right, so they could be 4 on 110mm but i hightly doubt it if they are 8 inch wheels. it is more likely that the wheels are the oem wheels, but for free a tire shop will tell you, then just say after he tells you what the bolt pattern is that you will think about it and order from DK.

[TravEX]

1984 200S is 4/130 with 8"
1984 200M is 4/150 with 9"

Howdy's right, you want to use a 9" wheel you're best bet may to switch hubs and go with 4/110 pattern, TONS of wheels for that bolt pattern.

Here's a table,


Travis

[84honda200s]

are you not sure if you have 4 on 150m? do not order any wheels until you verify that the hubs are the oem factory hubs for a 200s, 4 on 150mm. go to a tire shop and take a wheel with you and tell them you want some wheels, let them measure and tell you if they are 4 on 150mm, because like someone in this post said that the splines are identical and they are right, so they could be 4 on 110mm but i hightly doubt it if they are 8 inch wheels. it is more likely that the wheels are the oem wheels, but for free a tire shop will tell you, then just say after he tells you what the bolt pattern is that you will think about it and order from DK.


my bolt pattern is 4 on 130mm i know for sure because i measured it and it measures 5 1/8 inches converted to mm is 130mm. i need 150mm hubs. does anyone out there have a pair on 4 bolt 150mm hubs i couls get for a reasonable price. this trike is putting me in the poor house lol but it will all be worth it in the end. i will be riding happy.:beer

[team-red-rider]

hey rob i might ill have to check...what is the atc 110 bolt pattern (1985)

[mean350]

try this http://www.jlatvproducts.com/catalog/index.htm go to closeout and then wheels they are like 10 bucks

[Howdy]

hey rob i might ill have to check...what is the atc 110 bolt pattern (1985)

4/130 ;)
Howdy

[team-red-rider]

hmm rob could you use a set of the 110 hubs by any chance??

[jason85atc250r]

try this http://www.jlatvproducts.com/catalog/index.htm go to closeout and then wheels they are like 10 bucks
get rims for a suzuki lt230 quadsport. they are 4x130 and 9"rim diameter.

[84honda200s]

hey rob i might ill have to check...what is the atc 110 bolt pattern (1985)


4 bolt 130mm

[TravEX]

http://www.jlatvproducts.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=JLAP&Product_Code=17

JL ATV got some. Are you wanting 9" wheels instead of 8" wheels, for bigger tires or what?

Bling it up with some gold wheels! hehe http://www.jlatvproducts.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=JLAP&Product_Code=41

[84honda200s]

i need a 9 inch rim so i can get bigger tires. like the swamp fox tires i want they are 25x12x9 thay dont have anything bigger than 22 that goes on a 8 inch rim.