Tri-z Front Shocks

[tri-z tex]

I need to rebuild my front shocks on my Z but i need to know what air pressure and how much fluid i need to put in them. Any other info would be nice Thanks.

[clutchcargo]

Are you refering to the front forks? If so, I believe that they take 10 weight fork oil and no air. I'll have to check the service manual when I get home from work for the proper amount of oil though. Are you replacing the seals or just changing oil?

[Bryan Raffa]

85 z 10wt-334cc 0-8.5 psi
86 z 10wt-418cc 0-8.5 psi

[Yamahondaman]

NO AIR !!!! "they" say to "empty" out the air after each moto..air causes friction and heat ....
i used 11-12 oz's in each side of my 85 forks...."lower,softer" for sand drags
back in the day i would fill the tube up 6" from the top with no springs and collapsed down on the 86's

[Bryan Raffa]

im just going by what the spec's page from yamaha is telling me personally...I run no air or 2psi for mx..