Rear Sprocket 85 vs. 86 350X

[dvalley]

Is there a difference? Can I put a rear sprocket off an 86 on a 85 350X?

Thanks,

dvalley

[350xBomb]

No difference...85 or 86 youll be good to go.

[petesatc]

No difference...85 or 86 youll be good to go.
the 85/86 are different....86 sprocket has countersunking where the mounting bolts go.....to convert a 85 to a 86 you need to find the countersunk bolts and nuts....then it will work otherwise your chew the carrier up.......

[dvalley]

Does anybody know where I can get these bolts?

[atctim]

any honda dealership will have them. I have the 86 carrier and sprocket set up on my 85. It is good to do this because 86 carriers are the same as 250X 300EX and 400EX carriers good aftermarket availability.- 85's are not the same.

[350xBomb]

Boy is my face red...I had the 86 carrier too and didnt even think about that. Sorry for the misinfo.

[ScottZJ]

I had the same problem with my 85 250r. I had to buy the bolts at service honda and they cost me around 31$ shipped. :(

[threewheelin-feelin]

i have a 86 rad bearing carrier on my 85 350x....the countersunk nuts and bolt are expensive...i went to the local hardware store and found some bolts with smaller heads...the heads are about half the height of the stock 85s...if you do this take you old bolts with you and make sure you are getting smaller heads...and get stainless steal grade 8