PDA

View Full Version : 1984 200x



stevo
09-03-2006, 10:28 AM
im looking at buying a 1984 200x and was wondering about a couple of things, what is the top end seed of it? how many gears? how does it compare to an 85 model? thanks

stevo
09-03-2006, 11:01 AM
anyone know about the 84 200x?

theonlyjosh
09-03-2006, 11:17 AM
hey man you live near me haah i didn't think anyone on here did!

firefirefire90
09-03-2006, 11:18 AM
same exact trike as the 1985 appart from blue fork boots, blue seat cover with 200x on the side, and little cosmetic parts. The motor is a 192cc powerplant with dual valves and a single overhead camshaft. The trike is a 5 speed manual clutch without any reverse. OH, you meant speed...i thought you meant seed..Hah my bad. The top speed if the motor is worn to good i would say worn = 50 and good = 57

edog
09-03-2006, 12:20 PM
same exact trike as the 1985 appart from blue fork boots, blue seat cover with 200x on the side, and little cosmetic parts. The motor is a 192cc powerplant with dual valves and a single overhead camshaft. The trike is a 5 speed manual clutch without any reverse. OH, you meant speed...i thought you meant seed..Hah my bad. The top speed if the motor is worn to good i would say worn = 50 and good = 57


What do you mean by duel valves?

stevo Can you get pics?

firefirefire90
09-03-2006, 12:56 PM
dual valves


=


two valves

Mike_Ham_250R
09-03-2006, 01:21 PM
Fresh engine itll do like 50mph.

bassman
09-04-2006, 12:32 AM
My '83 did 54 mph with the timing off a few teeth.

stevo
09-04-2006, 07:44 AM
i can get it for about a $1000 i think, the guy says its pretty tight with low hours. the picture is not the best but what do u guys think?

tapper190
09-04-2006, 08:01 AM
hey, the bike looks good. Make sure you check the rear axle (not bent) and the bearings in the swinger. Check for weld spots on the frame, and rust in the tank. How far are you from London?
Tapper

stevo
09-04-2006, 08:11 AM
im about 7 hours to london, the 200x is in barrie which is not to far from u

edog
09-04-2006, 08:17 AM
Looks good,I used a photo program to get a better look at it.