PDA

View Full Version : Short track kit instalation papers



250r'en +TCB
08-23-2006, 02:12 PM
I'm getting a complete ST kit soon but with no instructions. I'm sure it's pretty easy to install but it certainly would help to have the instuctions.

I searched the forums for a scan but all I found was some pictures taken of them in which you can barley make out the illastrations, forget about the words!

So can somebody please scan me a copy of the instuctions? Or at least a GOOD picture of them were the illastrations are clear.........

Thanks Guys!!!
-Devin

ScottZJ
08-23-2006, 03:54 PM
Check this post. Email the poster and see if he has larger pics of it for you.

http://www.3wheelerworldforums.com/showthread.php?t=54120&highlight=short+track+instructions

250r'en +TCB
08-23-2006, 04:04 PM
^^^ yeah that was the one I saw....... I'll try PMing him though...

250r'en +TCB
08-29-2006, 07:01 PM
I got the kit now and it would reallt help to have a visible set of these instructions!!! The radiator brackets are confusing me!!!

When I look at a service manual it dosn't show the radiator going on the frame so it helps very little.

If somebody can walk me through it I'll get all the pics you need!!!!

deathman53
08-29-2006, 07:26 PM
you take off the radiators, put on the short track radiator braces and the top one bolts to the radiator bracket and the bottom should have a bracket that goes from the frame to the new location of the radiator hole. If it doesn't have the bracket, put all the bolts in and easily fab up a relocation bracket.