PDA

View Full Version : Hitch on a 200S?


Throesch
08-05-2006, 10:22 PM
how would you go about putting a trailer hitch on a Honda ATC 200S? just make one and weld it to the axle? or what?
84honda200s
08-05-2006, 10:34 PM
that would be my best bet. that oy make it so you can mount it to those huge bolts that hold your rear end in.
hondahaulic
08-06-2006, 12:11 AM
no dont weld it to the axle. if you weld it to the axle, the hitch will constantly be spinning around in cicles when you move forward.

(lol srry for bein a smart ass but i just couldnt resisit)

but yea id either weld it to the axle housing or make it so you can bolt it to the bolts that hold the axle housing in place.
dreadhed
08-06-2006, 12:32 PM
You can buy on that will fit right on the bearing carrier.
DeePa
08-06-2006, 05:26 PM
www.mfgsupply.com has them. They can be a pain in the ass to put on, but well worth it in the end.

Mike
TravEX
08-10-2006, 12:34 PM
Keep an eye out on ebay. Every now and then someone will have one. I'll check and see.

Travis
TravEX
08-10-2006, 04:18 PM
Here's what OEM looks like. Found it on ebay.
Banage
08-10-2006, 07:18 PM
dont weld it just buy one. Make sure they are from a big red, my big red never bends, but my 83 200 bends ever time i hook up the trailer