I can't find a Carb Kit for my YTM

[mark38090]

I can't find a carb kit for my 85 YTM200ERN, Bikebandit, Dennis Kirk, Ronnies Mailorder... Any suggestions.

[mark38090]

any help???

[thefox]

You can't find one because there is not one. You have to piece one together yourself. At one time I went throught the Yamaha part #'s and matched up them with another machine. I think it was the kit for the Yamaha Timberwolf (I think that was the model) that I found to be close and used, the needle valve and one of the jets are the same along with the gaskets and screws.

[Rocksoup]

Here's a link I found on ebay. You may want to check it out and see if the kit will work for your trike.
http://cgi.ebay.com/ebaymotors/YAMAHA-CARBURETOR-REBUILD-KIT-YFM-200-YTM-YFM-200-225_W0QQitemZ150009639801QQihZ005QQcategoryZ43979Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Unclediezel]

If the float still floats, and the needle doesnt leak. a good bath should get you back to normal---if you can save the gaskets, a lite smear of vaseline or Chap-stick, will keep them from splitting when you tear it down again.

[mark38090]

thanks, a good bath and finding a vent line pinched solved my problem...