PDA

View Full Version : Need a 1986 Tecate measurement


Dammit!
06-18-2006, 12:04 AM
I need an accurate measurement. Where the swingarm bolt goes through the frame, what is the exact distance on the inside there, one side of the frame to the other?
RideRed250R
06-18-2006, 12:18 AM
when you get anothe tecate?
Adam
OZQUAD44
06-18-2006, 02:21 AM
can measure the 87 tonight, about four hours from now
Dammit!
06-18-2006, 03:22 AM
I didn't get another Tecate. The measurement is to have a part made for the westcoast swingarm that I still have.
OZQUAD44
06-18-2006, 07:18 AM
Will have to be tommorow night!
Hornetpowerspor
06-18-2006, 09:09 AM
I just measured one, and it was 8.5 inches. That was with everything bolted up, so there is probably a 16th or so difference when the swingarm bolt is loose.
Dammit!
06-23-2006, 01:47 PM
I just measured one, and it was 8.5 inches. That was with everything bolted up, so there is probably a 16th or so difference when the swingarm bolt is loose.


Thanks!

If anyone has a frame without everything bolted up, a second measurement would be helpful. I need it to be as exact as possible.