FadedDreams
06-15-2006, 01:22 AM
I have a 86 Tecate 3 motor that I had completely re-done.I originally bought a Tecate 3 that I planned on rebuilding but I lost interest.Eventually I'm gonna sell all of it,but I was wondering what I can get out of the motor,even though I still might keep it.
Heres what the motor had done to it:
Brand new sleeve
Ported
Head was milled
wiseco piston
crank rebuilt
all new powervalve parts
all new seals,bearings,clutch arm
brand new v-force 2 reed cage
brand new stator and flywheel from Ricky Stator
Only thing that the motor needs is a stator cover gasket,I ripped it by accident.If it helps,I also have 2 stock carbs,twist throttle and cable,carb boot,wiring harness and complete stainless bolt kit.I pretty much have all the parts to make this tecate movable,but I just didn't want to mess with it.I'm more interested in getting my banshee back together again.
Heres what the motor had done to it:
Brand new sleeve
Ported
Head was milled
wiseco piston
crank rebuilt
all new powervalve parts
all new seals,bearings,clutch arm
brand new v-force 2 reed cage
brand new stator and flywheel from Ricky Stator
Only thing that the motor needs is a stator cover gasket,I ripped it by accident.If it helps,I also have 2 stock carbs,twist throttle and cable,carb boot,wiring harness and complete stainless bolt kit.I pretty much have all the parts to make this tecate movable,but I just didn't want to mess with it.I'm more interested in getting my banshee back together again.