z oil level check screw

[twgranger]

Can anyone tell me what screw i need? cant tell that good from the pics. Im looking for the screw on the side of the clutch cover where you check your oil level. do i need #22 and 23?

http://houseofmotorcycles.bikebandit.com/partsbandit/oem_schematic_view~schem_dept_id~645620~section_de pt_id~1~section_dept_name~OEM+%28Stock%29+Parts~de pt_type_id~2~model_dept_year~1985~model_dept_mfr~Y amaha~model_dept_id~632534~model_dept_name~YTZ250N .asp

[slothminx]

22 is the screw, 23 is the sealing washer.

If I were you I would replace the phillips head screw with a hex head bolt. I did that after I had a hard time removing the screw.

[Bryan Raffa]

:beer me too! LOL hey you going to tf??????? were leaveing wed

[slothminx]

Hah, I replaced almost all of those philips screws, only ones left are on hose clamps and the front brake resovoir.

[Bryan Raffa]

chevy 200s is leaveing from utica and meat box is in syracuse you could meet up with them and then meet me!

[Billy Golightly]

Yeah I took mine off too and have an allend head bolt in it now.

[twgranger]

Yeah I took mine off too and have an allend head bolt in it now.
would autozone carry them allen head ones? sorry cant make it to trikefest, have to work.:cry:

[03 ORANGE SHEE]

you need both, i too used stainless allen bolts

[Billy Golightly]

would autozone carry them allen head ones? sorry cant make it to trikefest, have to work.:cry:


In my experience Autozone doesnt have jack for bolt assortments. What you need is either a NAPA or an Ace Hardware store.

[twgranger]

In my experience Autozone doesnt have jack for bolt assortments. What you need is either a NAPA or an Ace Hardware store.
have both them stores here. ill have to match one up. that philips head screw sucks!!

[Billy Golightly]

I dont remember for sure but I believe its a 6x1.25 bolt.

[03 ORANGE SHEE]

hey, aint that light on top of the headlight for telling you if the oil is low??:confused: :lol:

[Yamahondaman]

6x1 pitch....................

[MTS]

Just go to the local bike shop, ask them for a hex head bolt that lentgh and pitch of thred.,....They should have one in stock...Bolt bin......Most time free ;)

[twgranger]

hey, aint that light on top of the headlight for telling you if the oil is low??:confused: :lol:no, that light lets you know when to shift. :beer

[03 ORANGE SHEE]

my bad, i got some billet plug in its place, i forgot what went there:crazy:

[twgranger]

my bad, i got some billet plug in its place, i forgot what went there:crazy:
Just like your billet muffler bearings.:lol:

[Bryan Raffa]

he has that colored power band too!

[Yamahondaman]

and he wants a Half-Link

[TimSr]

Almost any bike bolt with a 10mm head will work just fine. Make sure its not too long to hit anything inside. I use a copper washer for the gasket, buta plastic one works just fine. I have no idea what is factory any more.

[03 ORANGE SHEE]

boy, you guys are hard on me today!:cry:

[twgranger]

boy, you guys are hard on me today!:cry:
YOU DA MAN!!!! :lol: