Yamonda 1000x

[dreadhed]

I picked this up this up last weekend. It has a 1000cc MC motor in it. Does anyone know what this motor is out of. I did not even relize what size the motor was till it got home. I got 2 Xs from a guy for $200. The other one has a auto 200 w/ new rings & piston.

I know some of you will think it's wrong, but that is ok. This thing will haul some serious ass.

[Somekindofjerk]

Didnt save the other trikes too? Or would he sell them? Looks like a few decent trikes back there!!!

[dreadhed]

Those are all mine in the back ground. I tell ya I got a my own private junkyard. That is a small part of what I have. There are a couple trikes back there I would like to fix up.

[MTS]

I like the backwards exaust on the 200x...lol as for the big one.....i wouldnt run it without fixing up the frame and more gussets///it will just crack and fall aparty as is....would haul some ass tho./.

[dreadhed]

Didnt save the other trikes too? Or would he sell them? Looks like a few decent trikes back there!!!
Here are some pics of what I got. On the fouth page is a where you can see every thing.http://www.3wheelerworldforums.com/showthread.php?t=45557&page=3


I like the backwards exaust on the 200x...lol as for the big one.....i wouldnt run it without fixing up the frame and more gussets///it will just crack and fall aparty as is....would haul some ass tho./.
The backward exhaust is custom it cost extra. lol Ya the fram will need reenfocred. It should be fun when it done. I was told it needs new rings and piston, but I haven't even messed with it yet.

[Yamaha Tri-Moto]

Wow, that thing looks like a beast. And I agree , make sure you fix up that frame some lol.

[thefox]

umm, that is not a 1000cc engine. It might take 1000cc's of oil but displacment might be more like 200cc's.

[dreadhed]

That is what is says on it 1000cm3. I checked twice to make sure it did not say 100. I will get the numbers off the case & mabey some one call tell me what it is from.

[86tri-z270]

in that heaping pile of parts and boxes of parts would you happen to have a 86 tri-z right side casing for sale? top dolla

[willcamach]

dude that thing will be a beast if you get it running. id be worried about the 200x suspension it can barely handle the 200 cc motor let alone 1000cc lol

[thefox]

That is what is says on it 1000cm3. I checked twice to make sure it did not say 100. I will get the numbers off the case & mabey some one call tell me what it is from.

DOes it say that on the case or the cylinder? Check the clyinder for the displacment.

[danteross77]

I will have to agree with the displacement, I Have never seen a 1000cc motor with a single carb and a single exhaust, I might be wrong though, but my cb 750 is huge compared to that I could never dream seeing that in a 200x frame.

[Bryan Raffa]

That is what is says on it 1000cm3. I checked twice to make sure it did not say 100. I will get the numbers off the case & mabey some one call tell me what it is from.

if you got that off the side case, that how mutch oil it takes.. check the bottom of the head.

[Erics350x]

thats a 200cc single cylinder

[OZQUAD44]

There is no way on gods green earth that that is a 1000cc engine.

It probably holds a 1000cc of oil in the cases

sorry to disappoint you

[dreadhed]

if you got that off the side case, that how mutch oil it takes.. check the bottom of the head.
Ah I did not know that. Looks like I got all excited for nothing. This machince will be going to the chop block if it is just a 200 in it.

[Bryan Raffa]

LOL sorry man didnt mean to pop your bubble!

[dreadhed]

Some one had to. lol

[xman23]

yea i have never seen a 1000cc single

[burnoutboy]

Engine is a Yamaha Sr-250 engine. Those go very well for a single cylinder.


Here are some pics of my SR250, so ya can verify..
http://www.freewebs.com/burnoutboy/sr2503.JPG
http://www.freewebs.com/burnoutboy/sr2504.JPG

Your carb isn't the standard carb though...

[Brushwacker]

I picked this up this up last weekend. It has a 1000cc MC motor in it. Does anyone know what this motor is out of. I did not even relize what size the motor was till it got home. I got 2 Xs from a guy for $200. The other one has a auto 200 w/ new rings & piston.

I know some of you will think it's wrong, but that is ok. This thing will haul some serious ass.


THats a 200 or 250 out of a 80's small street bike like an XT or exciter.

[burnoutboy]

The engine is out of a exciter. XT looks a bit different from memory...

[dreadhed]

Engine is a Yamaha Sr-250 engine. Those go very well for a single cylinder.


Here are some pics of my SR250, so ya can verify..
http://www.freewebs.com/burnoutboy/sr2503.JPG
http://www.freewebs.com/burnoutboy/sr2504.JPG

Your carb isn't the standard carb though...
Thank you. Mabey I will keep it if it's a 250 street bike motor. Are they pretty quick? The carb that is on it is from a 200x.

[burnoutboy]

Yeah, they pull hard for a 250 single cylinder. In one of my manuals it sais that they are around 23 hp stock and thats with the restictor still fitted...

Speedo goes up to 140...