85 t3 won't start

[simplywired2004]

I can't seem to get my 85 t3 to start anymore. It's got a good spark, new gas, reeds, air filter, and plug. doesn't even give me a sputter, in fact, the spark plug comes out just as clean and dry as when it went in. my compression seems fine, takes about 3 kicks to build 175psi. any thoughts? the dry spark plug is what really gets me confused. even with a shot of starting fluid, it doesn't do a thing.

[86tri-z270]

maybe your carbs clogged and its getting no fuel to the head?

[BigGreenMachine]

Clean your carb and give it another go.

[scooterroo]

is the petcock turned on?

[simplywired2004]

checked the carb, and it's very clean inside. it seems like the gas is just isn't making it above the piston. I even tried taking off the filter and spaying gas into the carb while trying to start it and nothing happens and the plug is still dry. Maybe a gasket or seal in the crank?

[moose 53]

Did it shear the flywheel key and throw it off time.You have to pull the flywheel to check the woodruff key.

[BigGreenMachine]

Yup, good call. Had the key shear off of on mine once before.

Have you tried priming the cylinder by pouring a capful of gas through the plug hole and then kicking the bike over with the plug reinstalled?