more and more problems :(

[Erics350x]

Got my cam in today. Went to start it , no compression, tore it down and wouldnt you know the valves are bent from the old cam breaking. can the valves be straitend out ? also notice a very very small crack in the head running from a vavle to the spark plug. is this fixable ? should i just sell the dang thing?

[Somekindofjerk]

Get a new topend off of ebay, from the day you sell your trike and on you will regret it!

[edog]

No,you do not want to try to straighten bent valves.They are junk once they are bent.Can you post a pic of the problem spot on the head?

[Erics350x]

I'll see if it'll show up in a pic later tonight.

[Erics350x]

Its hard to see what do you guys think? Can it be fixed? Will it hurt any thing to just leave the crack? http://www.3wheelerworldforums.com/attachment.php?attachmentid=27531&stc=1&d=1146101985

[Somekindofjerk]

You better replace it, that crack will only grow and leak compression. As far as the 350 quad motor goes i have no idea, look up the specs for the two engines and see if the stroke is the same and if the bore is the same!

[edog]

Sorry,but you need to get rid of that.Take out of the head what is salvageable.Them you can sell it to someone who needs it,or keep it for your self.

[Somekindofjerk]

http://powersports.honda.com/atvs/utility/model.asp?ModelName=FourTrax+Rancher&ModelYear=2006&ModelId=TRX350TM6

It looks like a rancher head might work. But ask around and see if anyone knows.

[85ytz250n]

You definetly need to sell it, when would it be convenient for me to pick it up. ;)

Barry

[Cody]

You definetly need to sell it, when would it be convenient for me to pick it up. ;)

Barry

No, you see. Im closer to him :lol: