PDA

View Full Version : ATC200 quit running



Teeksoffroad
04-12-2006, 08:13 PM
I was riding my 82 ATC200 and it stopped running. Sounded like it ran out of gas. Towed it home and removed plug (new) next day. It was black so I cleaned it and checked for good spark. It fired up in 1 pull but only ran for a few seconds. I have gas and a good spark but won't start. Any ideas ? Thanks

b182tm
04-12-2006, 08:16 PM
You may want to check the carb. It could be dirty or clogged. Also, check all the lines leading to and fro the carb.

MichiganRedneck
04-12-2006, 08:20 PM
your problem is definetly fuel related. pull the carb off and give it a cleaning. i bet it will run better.

MTS
04-12-2006, 09:38 PM
Dose your gas cap make a sucking noise when you take it off after a stall?

burnoutboy
04-12-2006, 11:29 PM
Check your vacuum lock on the cap.They always seem to play up.

Teeksoffroad
04-13-2006, 06:29 AM
I did try the lock on the cap. Thanks for the replies.

MTUz400nate
04-14-2006, 12:01 PM
sounds like you are getting too much fuel and it is flooding the motor. could the choke be sticking on? if not then i would bet a good carb cleaning would fix it.