350x cam chain tentioner

[gplarryv]

is the tention adjustable or does it automaticly adjust, and if so how do you adjust it.
ive reset the lash and decompession cable and would like it all correct larry

[pinkerchook]

You should download the manual from http://deepa.recongamer.com/hondamanuals/index.html

Make sure you save target as because clicking to download will take too long.

[NOS_350X]

Ok, to reset your tensioner take off the 8mm bolt in the back on it (the single one in the middle) Then take a small flathead screwdriver stick in there and turn it backwars. This will pull the pushing arm back when you let go of it it resets. But unless you took off the cam or played with the tensioner is should self adjust.