Family pictures!, and need help Identifying a engine

[Kintore]

DISCLAIMER- There is ALOT of pics on here, I mean alot.

Well here they are, got all of em ready to go.

The non headlight one, is missing the airbox tube(lonesome) and a water pump seal and gear(have em have to install). Then its ready to finish to break in. Then The one with the polished rims is the new Z:w00t:
And then theres mine!:naughty:

Here are the pics, Dial Up I worn you lol

And heres the motor im talking about? will this clutch and stuff fit into my atc200?
And PS, I decided to save 3WW from all thew pics, so I had to register a 2nd photobucket account:lol:

Unknown motor-
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0348.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0349.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0346.jpg

16 Inch tires that work on the Z hubs lol I cant wait to try em.
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0345.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0344.jpg

The 200- Shes the beast!
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0351.jpg

[Kintore]

More pics-
Family pics-:beer Gotta love all them Z's!
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0353.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0354.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0355.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0372.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0373.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0371.jpg

My Z- Oh yah shes looking good and rides even better today!
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0356.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0366.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0365.jpg

[Kintore]

More!
The new Z, alot faster than mine. She screams!-

http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0361.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0362.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0360.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0368.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0363.jpg

My dads Z, getting ready to sell :( Have all plastics, just didnt bother to install them.
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0358.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0367.jpg
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0364.jpg

And Finally, my custom grab bar.
http://i60.photobucket.com/albums/h25/JoshTriZ/Pics/HPIM0375.jpg


What do ya think? lol

[lookinforone]

lookin really good man!

[Yamahauler]

Damn I love Z's. you are one lucky man!

[82300R]

very nice pic's. why whenever we try to post pic's they can only be the size of a postage stamp?:lol: :lol: i guess it's all in the operator huh!:D :D

[erectordale]

NIce lookin family of z's

[chris200x]

Something tells me Kintore likes those triz's.

[Maine_Triker]

Well.... beside's the fact that the pics are huge.... lol

Seriously... it doesn't get much nicer then having 3 86 Z's.... shame you have to sell one tho!

Keep up the good work Josh!
Phil

[Kintore]

Something tells me Kintore likes those triz's.


You noticed eh? lol

Thanks for the comments guys, I only get a digital camera every once in a while so I take advantage of it. All the pics I can. I still gotta buy some new spyder grips and other misc things. Going to have 2 SWEET tri-Z's when Im done. Shame I gotta sell one :(
Look forward to thread in the local riding forum on my saturday ride. Hopefully it involves a 700 raptor, a shee, 450r and others. Stay tuned!

[Dave223]

nice trikes! I have found one "parts trike" in all of southern la. and you have 3!!!
(btw i bought that trike for 20$). The engine in that pic looks like a 185/200 the clutches should fit. Look at the bottom of the cylinder, it should have a stamping that will tell you the size. Dave

[Bryan Raffa]

it was 21 years ago I rode my first tri z I was 12years old my brothers buddy had just bought a z and let me take it for a spin he told me to take it easey I did in first gear then i hit second and punched it and it stood right up scareing the crap right out of my litterly! I thought that was the baddest machine I vowed one day i would have one! now I own both years and will never get rid of them! nice bikes keep them going!!!!!! every time i look at a z i think of that day and my first ride!!!!

[Maine_Triker]

Look forward to thread in the local riding forum on my saturday ride. Hopefully it involves a 700 raptor, a shee, 450r and others. Stay tuned!
:naughty: You know who I picked to beat who Josh.... prove me wrong and beat that 450r! :w00t:

[IrvSLedman]

How much for the One Z?

[Kintore]

How much for the One Z?


Around 1200 CAD. I still gotta swap some parts to make 2 nicer ones though.

[nouseforaname90]

I personally think $900 is a very price for a Z.
And I've told you before that I like the pics, but I'll tell you again. Nice collection!

[82300R]

that looks like a 185 motor. tell me this , if the motor was upright( like it was in the frame) right above the spark plug and behind the compression realease lever on the head , is that a bolt that goes into the head? if it is i'm running mine with out one.(oh shot). if it is do you know why its there. by the way mine is a 1980 atc 185.

[nouseforaname90]

Is it toward the edge of the head? Is there a bolt on the other side that matches it? If I am right, I think you are talking about the bolts that hold your head onto the bottom end. But I'm not sure if thats what you mean..

[82300R]

Is it toward the edge of the head? Is there a bolt on the other side that matches it? If I am right, I think you are talking about the bolts that hold your head onto the bottom end. But I'm not sure if thats what you mean..
if you look in the first pic on the head there are three fins, at the bottom of the fins in between the first two is the bolt i'm talking about. on my 185 it is a tapped hole with no bolt in it . i looked at some pic's of a 185s head in an old mag and there was no hole that i saw. i just thought thats how a 1980 was. i wonder the purpose of this hole?:wondering

[85hondaatc125m]

That is a nice Family you got there, I see you even have the twins together in 2 pictures there, they are so cute, I would post a pic of my family, but they dont get along. You know how it is, the quad is jealous of the trike because the trike has 1 less tire.

[Howdy]

DISCLAIMER- There is ALOT of pics on here, I mean alot.

Well here they are, got all of em ready to go.

The non headlight one, is missing the airbox tube(lonesome) and a water pump seal and gear(have em have to install). Then its ready to finish to break in. Then The one with the polished rims is the new Z:w00t:
And then theres mine!:naughty:

Here are the pics, Dial Up I worn you lol

And heres the motor im talking about? will this clutch and stuff fit into my atc200?
And PS, I decided to save 3WW from all thew pics, so I had to register a 2nd photobucket account:lol:


The motor you have is a 200cc motor. It is either a 82-83 200e motor. How can I tell this from the pictures? In the 1st picture of the motor you can see the case where the electric starter fits. This narrows it down to either a 200e, 200es, 200m, or 84 TRX200 motor. Then in the second picture you can see the front sprocket for the chain drive. You can also see the the gear and shaft for the sub tranny. Being as the 200es and 84 TRX200 was shaft drive those are eliminated. The 200m's had chain drive but no sub tranny, so the 200m is ruled out. This leaves only the 82-83 200e motors as the only possibility. The vin number on the plate beside the shift shaft will confirm the year, model, ect.

But at any rate the clutched and such are the same, and will work in your 200.

Nice pictures by the way. I can't wait for TF!!!
Howdy

[Dammit!]

You need a bumble bee in that collection. I want one too. Not that I have any use for one but that isn't the point. :lol:

[350x'inNY]

Kintore...

Sweet Josh! Looks like you got a nice old barn there too! This summer we need to do some riding! (Maybe over Easter even????)

Here's a "family" pics I took last fall.... this was prior to striping the green paint off the BR some more and picking up the US90. Someday I might get the Yamaha's going and do their own photo shoot! hahhaa

Bruce

[pomona51]

Looks like a lot of nice Z's. Also looks like a great place to ride.

[Russell 350X]

Nice collection of Z's ya got there. Awsomeness.........

[thefox]

that looks like a 185 motor. tell me this , if the motor was upright( like it was in the frame) right above the spark plug and behind the compression realease lever on the head , is that a bolt that goes into the head? if it is i'm running mine with out one.(oh shot). if it is do you know why its there. by the way mine is a 1980 atc 185.

That hole is for the compression release mount for trikes that have the automatic compression release tied into the pull starter.

[Yamaha Tri-Moto]

Z's kick ass , very nice rides man

[Kintore]

Thanks for all the comments guys. Had one and within a few months I got 3 lol

You need a bumble bee in that collection. I want one too. Not that I have any use for one but that isn't the point. :lol:

No way, im all 86. Maybe if I find a good deal.



But at any rate the clutched and such are the same, and will work in your 200.

Nice pictures by the way. I can't wait for TF!!!
Howdy

Thanks alot howdy, thats what I was looking for. Now to get it apart and now screw it!


Kintore...

Sweet Josh! Looks like you got a nice old barn there too! This summer we need to do some riding! (Maybe over Easter even????)

Bruce


Im in for that, but whos going to drive what way? lol

[BigGreenMachine]

The new Z looks very nice. What mods? Have a look inside to see if its been ported/bored?

James

[Kintore]

No I havent yet, Guy said stock porting. It has a pipe and reed cage, and a uni. And a fresher top end than my 20 year old one lol

I cant wait to send my clyinder off to Halls performance for porting, and a and hone and all that, with a new top end she will scream!!

[350x'inNY]

Im in for that, but whos going to drive what way? lol

Hmmmm.... I assumed I'd be driving. I'm heading out to Swinehart's, but I'll probably have a trailer to bring back my girlfriends 225DX. Guess if my trailer was MT heading out, it wouldn''t be a problem.... I can drive home through Ohio.

Bruce

PS -- By the way, I went riding with Bryan Raffa tonight with his Tri-Z. His sounds sweet! I haven't driven a Z since back in the day!

[Bryan Raffa]

thanks buddy had fun watching you wipe out on the 350x he he he!!! pretty graceful!! next time Ill let you take it for a spin should had said something. rode around for another hour after you left. my buddy got stuck in that mud hole you got stuck with the 250r pretty good took us a half an hour to get it out,hooked up with those 3 kids on dirtbikes and tore it up! had fun thanks.

[350x'inNY]

thanks buddy had fun watching you wipe out on the 350x he he he!!! pretty graceful!! next time Ill let you take it for a spin should had said something. rode around for another hour after you left. my buddy got stuck in that mud hole you got stuck with the 250r pretty good took us a half an hour to get it out,hooked up with those 3 kids on dirtbikes and tore it up! had fun thanks.

Cool.... did you make it across on your Z or did you just haze your friend into getting stuck in it?

3 kids on Dirt Bikes? I only know one that I've given permission too. :mad:

Josh... you'll have to come out here during the summer. Have to time it when Swinehart and Liway come out too! :beer

[Kintore]

Cool.... did you make it across on your Z or did you just haze your friend into getting stuck in it?

3 kids on Dirt Bikes? I only know one that I've given permission too. :mad:

Josh... you'll have to come out here during the summer. Have to time it when Swinehart and Liway come out too! :beer

Tell me a date and ill see what I can do!:w00t:

[Bryan Raffa]

Cool.... did you make it across on your Z or did you just haze your friend into getting stuck in it?

3 kids on Dirt Bikes? I only know one that I've given permission too. :mad:

Josh... you'll have to come out here during the summer. Have to time it when Swinehart and Liway come out too! :beer


of corse i made it through!!! But I also love hazeing people specialy on 4 wheelers LOL He was right up to the frame hehe the one kid is the one we picked up that day looks like he got a new crf 4 stroke and 2 other kids one on that blue yamaha and a suzk.

josh we'll get you out here this summer! bruces place is great! maybe we can get bruce to do a mini trike fest with camping???

[Kintore]

Ill see what I can do, sounds like a great plan. I just need a date!

cough*Bruce*cough