how to wire coil and kill switch for ATC 70.

[conig]

when I dissassemebled my 70 I managed to loose my notes on how to wire these two things up. I finally came in contact with a throttle assembly(no cable) but can;t remeber how the kill switch hooks up.

[conig]

can anyone take a look for me and tell me were the black wire goes when hooking this up? also I think I hooked the coil up wrong as Im not getting any spark and it appears the factory kill switch shorts out the coil to cut the engine off.

[Vealmonkey]

Just match the colors. I'm not sure which wires you have left? The green wire on the kill switch should have a round attaching point and it attaches to one of the screws that hold the coil mount to the frame. The other wire goes to its same colored wire.

[conig]

ok thats what I figured but I have two (I beleive black wires) coming from the case that were painted over when the motor was painted. then one black off the coil and one from the kill switch.

ill try and scratch the paint off and see if I can figure it out. thanls for the help.