Advice on a chain and sprocket?

[nouseforaname90]

Ok. So since my last thread was mainly about powdercoating, and the sprocket/chain issue wasnt getting attention, I'll post it up here.
I decided that I have a max of $100 to spend on a front and rear sprocket, and chain together.
http://cgi.ebay.com/ebaymotors/DID-O-Ring-Chain-Sprocket-Combo-YFM-350X-87-88_W0QQcmdZViewItemQQcategoryZ43982QQitemZ46023170 63QQrdZ1QQsspagenameZWD1V
Now I found that on eBay, but is it a good chain and are those good sprockets?
If you guys have any other suggestions of a good chain and sprockets for under $100, I'd love to hear them.

[jason85atc250r]

that don't seem like a bad deal. definitly get the o-ring chain.

[Kintore]

I went to rocky mountain atv, for like 70 bucks I got-
New X ring gold plated DID chain
DID rear sprocket,

If you want a front one its like 5.99. So for like 80 bucks theres a sweet combo.

[Dammit!]

Get the RK listed in the other thread and pick up a couple sprockets from rocky mountain as well and you'll spend less than that.

[seadoo650]

That is for a Yamaha Warrior. Is that what you want it for?

[nouseforaname90]

No. But I realized it was for a Warrior shortly after I posted the link, and searched it again. I found an RK X-ring chain and Hi-density steel sprocket combo for like $87 dollars.. so I'm going to get it.

[seadoo650]

Let me know how it works out. I'm gonna be in need of one for my 350 also. Could you post a link please? Are you also restoring a 350x?