hub swap on 83 ytm 200k

[nimda78]

hi guys quick question,

is there a yamaha 4x110 or 4x100 hub that matches the splines on my 83 ytm?

im dying to shed some of that weight and add some bling by ditching the steelies, but three lug aluminum wheels are rare, and likely impossible to find in a set of 3 :S
i see so many cheap sets of 4x100/110 seems like swaping hubs is the way to go.

and since i mention hubs, is a gear puller the best way to pry those suckers off the axle?

[danteross77]

I think the 200 x hubs will work. I bolted a set onto to my old yanaha 175 a long, long time ago.

[nimda78]

does the 175 have the same spline count as a chain drive 200?
thx

[danteross77]

not really sure I never owned a 200 Yamaha. The 175 I had was such a pain in the ass for me I sold it and bought my Honda. But I did have the 175 hubs and they fit on most of my Honda axles, spline wise.

[traxxasx]

i just tap then with a hammer on the back, if your splines are the same as the tri moto 225 then the banshee and tri z hubs work.

[thefox]

i just tap then with a hammer on the back, if your splines are the same as the tri moto 225 then the banshee and tri z hubs work.

225's and 200's have the same splines. I have also heard that Blaster hubs will fit but I haven't tried them yet.