honda 185s engine removal

[troyboy]

I have an older model honda 185s 3 wheeler and it is leaking oil between the engine & the transmission(? )You can see it seeping between the two parts.
I thought I would remove the engine but after removing all the bolts I can see it still wont come off. It is loose but still connected----maybe to the transmission? Any helpful info out there? Thanks in advance.

[Dave223]

the engine an tranny are 1 peice, look under the rear of the engine. Sorta behind the sprocket, there is a bolt under there that holds the engine to the frame (kinda hard to see) did you remove this one also? There are 4 up front with the engine mount, 1 at the top of the engine, and 2 at the rear of the engine, 1 is even with the top of the engine at the rear with a spacer and another down below but inside a little ways.
The exhaust has to be removed first also. When you have all those bolts out, lift or pry up slightly on the engine until you feel it come loose. sometimes they fit tight in the mounts. Good luck, Dave

[MTS]

Make sure you took the chain off....