View Full Version : Can anyone tell me the ear of my tri moto?
90nut
01-02-2006, 06:37 PM
Ok, as no dealers are open on mondays around here I am needing some help with the year / model of this trike. So if anyone can tell me what year and model this is from the vin # please help me out. Engine vin is 21y-070497, Frame vin is jy321>(possibly L)y000fc070427. Thanks
350x'inNY
01-02-2006, 06:44 PM
1984 YTM200L Chain drive. Oops... me bad... thought you said 21V.... not sure about 21Y
Bruce
Unclediezel
01-02-2006, 06:46 PM
as far as I know--Engine and frame #'s should match -,unless something was changed----its possible your engine is from a different vehicle altogether-(Sled-dirtbike-etc)---
90nut
01-02-2006, 06:49 PM
Ok so the ytm200 is a 2 stroke? always thought they were fours. This thing is really turning into a cobbled up mumbo-jumbo of years and parts. The engine came up as a ytm200l correct? As the frame says 1985 somethin on the tag, actually id doesn't mention the model on it. Ok more questions, this has a 125 jug on it do you know if the stroke is the same? Oh, what have I gotten myself into this time?
90nut
01-02-2006, 06:50 PM
I will go double check the 21v/y issue. be right back
Ok so the ytm200 is a 2 stroke? always thought they were fours. This thing is really turning into a cobbled up mumbo-jumbo of years and parts. The engine came up as a ytm200l correct? As the frame says 1985 somethin on the tag, actually id doesn't mention the model on it. Ok more questions, this has a 125 jug on it do you know if the stroke is the same? Oh, what have I gotten myself into this time?
the 200 is four, from what i have seen just sounds like you have a YT125 with 175 plastics...unless you can get some pics it will make it much easier.
holmstrom
01-02-2006, 06:51 PM
they would match if its the motor is the original motor. One of mine has different numbers because i used the frame from one yt125 and the motor from another . i dont believe a 125 jug would fit on a 200.
90nut
01-02-2006, 06:53 PM
Ok, number off of the engine is most definately 21y-070497
Howdy
01-02-2006, 08:15 PM
Hmm, my OEM fiche at the shop has identification stuff on it ( I think ). I will stop in the morning and find out.
Howdy
Howdy
01-07-2006, 02:31 AM
A little delayed but here is some info on the Tri-Moto 125-175's:
1980 YT125G
Initial engine Number / Frame Number: 3x3-000101 / 3x3-000101
1981 YT125H
Initial engine Number / Frame Number: 4*Edited*3-000101 / 4*Edited*3-000101
1982 YT125J
Initial engine Number / Frame Number: 5V6-000101 / 5V6-000101
1983- No data
1982 YT175J
Initial engine Number / Frame Number: 5V7-000101 / 5V7-000101
1983 YT175K
Initial engine Number / Frame Number: 20E-000101 / 20E-000101
Going with your Vin / motor number I would say you have a 1984-85.
Howdy
90nut
01-07-2006, 01:35 PM
I called the dealer and it turns out to be a 1985 125. still trying to get this pull starter problem fixed though.
otonopaz
05-28-2011, 12:56 PM
I have the vin number 5v3-00391163 for my 125 tri-moto. can anyone tell me what year and model it might be? thank you soo much.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.