best way to clean grimed up plastics

[trimoto55]

I recently got better fenders that worked all cracked up for my 225, but my question is whats the best way to clean that grime crap off?like a brillo pad and what kind of cleaner would be the best?

[jrsyredneck]

mop'n'glo worked pretty good for me

[MTS]

Get some Hot water, scrub brush and some Good ol Sunlight, will get all the dirt off...if its oxidixed you have to sand it out with 600-2000 grit wet/dry sand paper.

[Yamahauler]

Scrape the fenders with a razer blade if there is a brown oxidization and then start wet sanding. like MTS said 600-2000. It worked out great for me.

[peeweesp]

Get some Hot water, scrub brush and some Good ol Sunlight, will get all the dirt off...if its oxidixed you have to sand it out with 600-2000 grit wet/dry sand paper.

yeah then armor all makes it shine nice once it is clean.

[N5HNY]

I read somewhere that after you scrape with a razor blade, sand with very fine grit wet sandpaper, then go over the piece with a heat gun.

You heat it just enough to where you see Armour All just steam off a little when you spray it on.

Warning though, I haven't tried this myself.

Might want to try it on an old broken fender or other plastic part.