PDA

View Full Version : 200es no key



Timmer
12-23-2005, 10:21 AM
how do i start my 200es without the key. PLEASE HELP

mymint87
12-23-2005, 10:36 AM
Just get another key made..

It's like 10 bucks for a duplicate.....

bigredhead
12-23-2005, 10:48 AM
Go ask who ever you stole it from for the key.. simple.

lol..

Seriously tho. i have the same problem on my 125m.. the ignition is cracked right off and no key, i will have to rig something.. they show up on e-bay once in a while, but go for a good price !!!!

renotrikeguy
12-23-2005, 10:58 AM
Disconnect the part of the wiring harness that goes to the key switch, then connect a jumper wire onto the 2 larger diameter wires. This is how I did it on my 250es when I first got it.

cajun66
12-23-2005, 06:18 PM
On my 200E to 200 swap, I plan to install an aftermarket ignition switch I got from Autozone. I'll post pics of the install when I get into the project.

Unclediezel
12-23-2005, 08:57 PM
http://deepa.recongamer.com/hondamanuals/82n83atc200eservicemanual.pdf

Down load the service Manual---(Compliments of Deepa--Send him a virtual beer when your done)
Find your wiring diagram --see which wires connect thru the switch-and bridge them-----Problem solved-
:welcome: To the boards

ClayW
12-24-2005, 10:00 AM
I took my ignition cylinder that the key goes in to a lock smith. He made me a new key by hand in about 5 min. Charged me $10 and gave me a spare key.

twoodward15
12-24-2005, 10:07 AM
Can you just find the hot wires and wire in a toggle switch? Get one of the red guarded ones like you see on airplanes and it'ss blend right in and look cool!!!