2 Stroke Oil, Safest Mixture So She Dont Blow?

[Meat-BoX]

I only Put in slightly less than 4 oz per 1 gallon, thats a litttle less than 32:1
My ? is that I heard theres a difference between the recomended 32:1 - 50:1

Im running KLOTZ R50 at 32:1 through a totally rebuilt motor, all of it. 2nd Gallon of fuel through it. Which was a huge boost in speed and power over the Yamalube I used in the 1st tank.

What is the difference between the recomended 32:1 - 50:1
and what mixture should I run in my Tecate
I heard that the differnce can meen a Blow motor.
Whats the safest mixture for my new 2 stroke motor?

Any info would be good because really all I know is what it says on the bottle, not what it does for the machine, except make it smell good.:naughty:

[OldSchoolin86]

Well Honda recomends 20:1 in the R but I always ran Klotz at 50:1 with zero problems. Not sure about the Kawi's but I'd think the same would apply if your jetted for it. I once read an article about running like 16:1 and it had an explination about the oil in the bottom of the crank, but blah blah blah is what I think about thick mixing. If you wanted to be "safe" then stick to 32:1. Like I said tho, mine were safe at 50:1. Just remember that jetting is key when you start playing with your mix ratio.

[1984kxtTECATE]

Sprock racing reccomened 32:1 for the kawi's, I run 32:1 and it feels fine, you will get better ring seal running more oil also, so it is always a good all around mixture, I run HP2 synthetic.

[ATCWRENCH]

my T3 is mixed at 50:1 on belray HP2. the guy that I bought it from ran it at 50:1. I am gonna go back to 32:1 just for my knowledge that its ganna get enough oil and not seize up on me. and I'm gonna switch to amsoil synthetic 2 stroke mix. my dads a dealer and he can get it cheaper than most.

[BigGreenMachine]

I run 40:1 with Yamalube and haven't had a problem with it.

[Six Stroke]

32:1 with Amsoil Dominator, and just a little richer in the winter.

[slothminx]

Ive been told many different ratios and im not sure what to think. People who have great sucsess with there Z's have told me 50:1, while other have said as oily as 20:1 with a synthetic oil. But the people who i ahve got the most feedback from are at 50:1 and 32:1 so i have decided to go in the middle at 40:1. I will be running sythetic blend Klotz supertechniplate. Infact i just bought some today :).

Really its a personal choice but it seems to be the recurring theme here to go with a synthetic oil apart from those guys who like i love the smell of caster oils burning.

[MTS]

I have run 50:1 all summer in my air-cool 465, if anything was gona sieze or over heat that would have and i ride it HARD.....

[3leggeddog]

50:1 on most synthetics.i bought some amsoil once and it siad to run it 100:1.idk about all that,so i still ran it at 50:1.never any problems.

[Kintore]

I run 32:1 and it feels fine, you will get better ring seal running more oil also, so it is always a good all around mixture.

I ditto that, Im at 32-1 and had Zero problems as well.