250sx question

[BLAZERONE22]

Anyone have a part number or what type of puller to yank the flywheel off a 250sx? I am tearing one down to salvage some parts and none of my pullers are working for me. I really don't want to ding up the flywheel with my jaw puller.

[Dirtcrasher]

Oh Sh!t, I forget exactly the thread and pitch but simply put, it is just a bolt with somewhere around 20mm and I think a 1.5 pitch. The pitch is an odd pitch for that large a diameter.

[BLAZERONE22]

I've tried every friggen bolt I own in that sucka, theres always something. lol

[Dirtcrasher]

I think the dam axle threads from a used axle fit perfect, I may have used a stock SX axle at the time - I forget, now I have the threaded stud. But if you have a spare axle around, throw some vice grips on it and have a ball!!

[BLAZERONE22]

I think the dam axle threads from a used axle fit perfect, I may have used a stock SX axle at the time - I forget, now I have the threaded stud. But if you have a spare axle around, throw some vice grips on it and have a ball!!

Lookie what I got! thanks a bunch Dirtcrasher :beer 350x axle works duckie :p :p :p

http://i25.photobucket.com/albums/c67/blazerone22/100_00811.jpg

[BLAZERONE22]

Well its all apart, that was my first teardown of a 4 stroke. good times!

[Howdy]

Lookie what I got! thanks a bunch Dirtcrasher :beer 350x axle works duckie :p :p :p

http://i25.photobucket.com/albums/c67/blazerone22/100_00811.jpg

LMFAO!!! I have seen front axles used for flywheel pullers before. But this is a first right here!!
People this here is proof that having spare parts kicking around can save you money.

Howdy

[Dirtcrasher]

Awesome, glad you had one laying around. When I discovered it I had my ex fiance' holding the motor on the bench while I was holding a 3 foot axle trying to break it loose, we almost knocked the motor off of the workbench,LOL. It's all good.....

[mad_max]

Dang,

Dirtcrasher, my hat is off to you :beer