YTM 200 ?s

[MichiganRedneck]

hey guys, im new to the site and new to the three wheeling sport. i got a YTM 200 that runs great but i need to rebuild the front forks. any pointers? how do i add fork fluid? also, do any of you guys know if cobra, or any other exhaust company, ever made a system for this trike? thanks

[edog]

Are they bent?If they are i have a strait set.

[LonesomeTriZ]

The forks are not all that bad to rebiuld. They are pretty straight forward. Cobra did make a sytem for that trike. They pop up on Ebay every now and then.

[MichiganRedneck]

the forks are not bent but both seal leak like a biotch. so i was just gonna order new seals for it and put em in.
any ideas to where i can buy an exhaust system for it. none one ebay

[thefox]

I would suggest getting a repair manual for your trike, well worth the money. It will give step-by-step instructions for the fork rebuild. Most of the time you just have to replace the seals and change the fluid.

For the exhaust you can still get a DG exhaust. I believe the cobra is now discontinued so that would take some looking for. I just bought a Kerker off ebay but that is also discontinued, I was told it was made by SuperTrapp. Of course you can always look for a used stock system too.