View Full Version : Need help on jetting fast!! Ride tomarrow!
thebutelr
11-03-2005, 09:38 PM
I'm really in a bind now, my 350x just went to crap after playing around with the jetting for about 2 weeks now. It ran fine yesterday cept for it idleing kinda low. Now it wants to spit and pop really bad when I give it any gas and wants to die if I don't have the choke on. I already cleaned out the carb with some carb cleaner so i know nothing is clogging my jets. Any ideas?? I really would like to try and fix this before tomarrow so I don't have to back out of the ride! Thanks a lot. Later.
thebutelr
11-03-2005, 11:03 PM
Anybody???
TeamGeek6
11-03-2005, 11:21 PM
It may not be all carb jetting problems, whens the last time it had a compression check and valve clearances set? One leaky valve can do all that.
SmokinX
11-03-2005, 11:40 PM
If its popping, sounds like you're running lean. Try messing with the air screw which is the one on the bottom of carb facing down. I beleive factory setting is 2 1/2 turns out.
Tri-ZNate
11-03-2005, 11:56 PM
if it wont run without choke then your running too lean if it jetting. A clogged jet will make it spit and sputter too but if your sure you cleaned it well then I think it is jetting.
What is your main jet right now?
thebutelr
11-04-2005, 01:21 AM
Thx for the replies guys, I think I figured out my problem, like you said my jetting was lean. I had a 140 main, 40 pilot, and the needle clip one above the middle. Then i changed it to a 145 main, 42 pilot, and the needle clip one below the middle slot and it runs great. My mods are a supertrapp pipe, k&n filter w/ no airbox lid, web cam (thats camshaft not as in computer web cam lol), and a wiseco 10.5:1 piston. Now i'm all set to ride for tomarrow :w00t: . Well i'm out, Later.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.