PDA

View Full Version : Drag bike pics..


freaksfix
11-03-2005, 07:21 PM
Well I got it done in time,, its ready to run and the drags are on Sunday... Took me 3 weeks from start to finish.. I started with a bare frame with no motor mounts, made all the mounts for the tank, fenders, and breaks.. The breaks came off of the front of a KH400... I also made the wheelie bar and pipe.... We ran 500 foot in the road today with a stop watch and its around 5.5 sec doing a burn out in 4 gears.... Its going to need 1.5 inch sled studs........
BigGreenMachine
11-03-2005, 07:30 PM
Thats pretty wild, what is it? 250R lump is all I can spot.
Murph
11-03-2005, 07:35 PM
What is that thing? Looks like the tank and fenders are off of 110, but what is the rest of it? haha.
monster 84r
11-03-2005, 08:01 PM
correct me if im wrong... 83 or 84 250r motor, dg head ? looks awesome, must have taken alot of time and work to make it fit.
Yardbird
11-03-2005, 08:21 PM
First time I've seen Spider Traks on a drag bike. Aren't they kinda of heavy for a drag tire?
BigGreenMachine
11-03-2005, 08:33 PM
First time I've seen Spider Traks on a drag bike. Aren't they kinda of heavy for a drag tire?

I was thinking the same but it seems this is a budget dragster rather then a high dollar rig. Lightweight rubber thats gonna find traction is sometimes expensive.
Yardbird
11-03-2005, 08:35 PM
Good point. :)
cracked junior
11-03-2005, 08:41 PM
captain america helmet. sweet
ATC-Eric
11-03-2005, 08:43 PM
That thing looks naughty!

I want to ride it :w00t:
Vealmonkey
11-03-2005, 08:55 PM
Very cool. I like it alot. Let us know how you do. And send more pics. Good luck at the drags.
edog
11-03-2005, 10:06 PM
Thats the way it came when he got it.
Meat-BoX
11-03-2005, 10:17 PM
Looks cool, I hope you guys run well at the drags. I was thinking the same about the tires. Im sure you can get some nice tires at about $50 each. Lighter and More Traction = More Speed:w00t:
jeswinehart
11-03-2005, 10:36 PM
4.5 in 500 feet ,,, keep the tires !!!

Best of luck freaks ,,, keep us updated please.


john
freaksfix
11-04-2005, 10:21 AM
4.5 in 500 feet ,,, keep the tires !!!

Best of luck freaks ,,, keep us updated please.


john


Typo,, it was 5.5...... And who nows how accurat that is,, (my brother with a stop watch) lol.... But its probly real damm close...
freaksfix
11-04-2005, 10:32 AM
First time I've seen Spider Traks on a drag bike. Aren't they kinda of heavy for a drag tire?



Yeah but the whole bike is alittle over 200#,, so a few #'s extra in the rear tires aint much... Plus the the drags aint a regulated race on a hard dry track.... Its a big bash where all the redneck get together in a farmers feild, with a good chance of rain so some light weight paddles arnt a good choise.... You race whatever you have bikes, trikes, quads, sleds, trucks and dune buggy's,,,,,,, there is no classes just grudge matches and you go home with bragging rights.....
freaksfix
11-04-2005, 10:36 AM
Thats the way it came when he got it.


Yeah I got it from the same guy you got that spray bomded roach of a DX from... Good luck selling it for $2000 with the motor knocking like that....
brapp
11-04-2005, 10:39 AM
hey next season bring it down and run the drags at lawton and other drags.
bigredhead
11-04-2005, 10:41 AM
Bring the camera... PLEASE......
hrc85250r
11-04-2005, 05:44 PM
dont use 1.5" studs, they will bend over for one, and eventually they will rip out, trust me ive done it with our drag quad...get ice screws and ccut out every 2 rows of lugs on some 20" turf tamers, that will be all you need for a 250R...studs are WAY overkill for any 250 or any stock motored quad, if you use a sled engine or a bike engine and its in a good drag chassis it will need studs, that the only time.as a matter of fact we cut off more than a 1/4 inch off of our drag quads studs, and we used 1.6" studs....
BigGreenMachine
11-04-2005, 06:48 PM
lol so what is it? a 250R motor'd 110?