Finally Got Pics Guys

[YTM200BOY]

Hi dudes i got pics of my awsome 3 wheeler its a 83 ytm200. EK edition.. It fires off on the 1st pull now.. all i need to do is adjust carb and some how fix the carb from randomly flood out a pour gas out of it then im all set.! How do i get the pics on here? plz help guys thanks im a newb lol. -Joe-

[Tri-ZNate]

well sounds like you need the carb cleaned and as for pics click edit on your post you just made and about middle of the page (scroll down) you'll see manage attachments. click on it. browse for the file(s) you want and click upload. make sure they arent larger than 200kb or you'll have to resize them.

[ATC crazy]

Go to a place like www.photobucket.com and upload your pictures (its free), and then you can just cut and paste the picutre on here.

There is also a thing below where you type in your reply, where you can upload your pictures.

[Tri-ZNate]

or go to supload.com and upload you pics right there on the home page and you'll get some links to put pics up

[phreakboy]

All you should need to do to fix the gas from pouring is adjust your float, clean it to make sure it is not sticking, and make sure that is doesnt have a pinhole in it causeing it to stay open.

[yamahaman89]

yea your floats are probably the problem. Thats usally the main cause of an engine flooding out

[YTM200BOY]

my floats in the carb are wierd how go * adjust them properly? are they 2 high or 2 low?

[phreakboy]

they are too low, thus allowing fuel to flow in too much, there should be a little tab where the needle attaches to the float that will effect the level in which it cuts off fuel, you want it to cut off when the float is dead level.