PDA

View Full Version : TRI-Z Airbox Cover Measurements Req.


Aussieduner
09-27-2005, 08:16 AM
Im about to make a mold for the Z airbox cover but i need the measurements from the pic attached.The part is quite flexable when not mounted on the machine and im going to make a jig to hold the part correctly while the mold is being created.
Also if anyone can measure the distance between the bolt holes on the frame will help...im metric so in millimetres if possible ??

Any help appreciated.

Cheers :beer
Aussie
jsimonh
09-27-2005, 05:41 PM
The length between back mounting post to back mounting post was 6.5 inches. The length from the back mounting post (measured from middle) to front mounting post was 15 inches and the overall length was 16 inches. Also the width was 9.5 inches mounted.

I hope this helps and sorry I don't know the conversions. ;)
Aussieduner
09-27-2005, 05:58 PM
The length between back mounting post to back mounting post was 6.5 inches. The length from the back mounting post (measured from middle) to front mounting post was 15 inches and the overall length was 16 inches. Also the width was 9.5 inches mounted.

I hope this helps and sorry I don't know the conversions. ;)

Thats cool i can convert to mm...hey when is the US going metric ?? LOL
Those will help with the jig im making so i can get these made ASAP,im on holidays...

Cheers :beer
Aussie
jsimonh
09-27-2005, 06:07 PM
Drop me a pm when those are done in black ;) :naughty: :w00t: :beer .
Jeb
09-27-2005, 06:24 PM
I'm hoping for one in Competition Yellow! :w00t:
Dammit!
09-27-2005, 06:28 PM
Drop me a pm when those are done in black ;) :naughty: :w00t: :beer .

Yeah same here! :D
Derrick Adams
09-27-2005, 06:35 PM
Yeah same here! :D


Yeah, here too! Selling one of those with the black shrouds will make the Tri-Z guys VERY happy!
Aussieduner
09-27-2005, 09:14 PM
I have the mesaurements and have set the part in a jig so its time to glass this baby and get the mold done,should be very quick.

Cheers
Aussie
jsimonh
09-27-2005, 09:41 PM
I have the mesaurements and have set the part in a jig so its time to glass this baby and get the mold done,should be very quick.

Cheers
Aussie

Man you work fast! :eek: I sure hope those numbers were close enough to get the job done right ;) . If it's off then you must have done the conversion to millimetres wrong! :lol: :lol: :lol:

I'm just playing I can't wait to get my hands on one :w00t: . I've already got my new YAMAHA side stickers in. I also got some fenders coming from ebay that are black and still have the stickers on. I'm hoping with the black shrouds, black airbox cover and black fenders it will turn my 85 yellow/black into a 85 black/yellow :D .
Aussieduner
09-29-2005, 01:31 AM
Man you work fast! :eek: I sure hope those numbers were close enough to get the job done right ;) . If it's off then you must have done the conversion to millimetres wrong! :lol: :lol: :lol:

I'm just playing I can't wait to get my hands on one :w00t: . I've already got my new YAMAHA side stickers in. I also got some fenders coming from ebay that are black and still have the stickers on. I'm hoping with the black shrouds, black airbox cover and black fenders it will turn my 85 yellow/black into a 85 black/yellow :D .

I have made the mold and released it from the doner part,just have to mount it on ply and core fill it and its all go !!!

Aussie