rebuild question

[Yamahauler]

Ive got my YTM all together just about, except for the cam chain tensioner. It is out of the motor right now. What do I do to ajust it? Clymer doesn't explain it well enough.

BTW, it's not an auto chain tensioner.

[freewheel3]

Screw the adjuster in until the push rod (inside the adjuster) is flush with the end of the adjuster, tighten the lock nut (22 ft-lb). Start it up, let it idle & make sure there is a slight bit of movement of the push rod.
If there is no movement, it is set too tight.