PDA

View Full Version : 1985 125M spark help.


New2ATC
09-13-2005, 11:26 PM
Okay I just got a 125M and it has no spark. What can I do to get spark? Are there points in these engines? Is there any other common problems about this issue i should look for? The electric start works and the neutral light works and the headlight turns on so I dont think the whole elctrical is screwed up. But anyhting i should check and or do to get spark?
chris200x
09-13-2005, 11:29 PM
Replace the excitor coil (I think that's what it's called) inside your stator. ;)

http://www.crosstec.com/wc.dll?ctwp~getitemsearch~1001~1002~1
MTS
09-13-2005, 11:32 PM
Are you sure your plug is good....?
New2ATC
09-14-2005, 01:35 AM
its a brand new plug judst bought it today BR8ES
Howdy
09-14-2005, 08:59 AM
Here is a posting with some electrical testing info. It may just help you locate the problem.
http://www.3wheelerworldforums.com/postings.php?do=getip&p=198405

Here is another with a check list. ;)
http://www.3wheelerworldforums.com/postings.php?do=getip&p=59902


Howdy
chris200x
09-14-2005, 10:12 AM
Here is a posting with some electrical testing info. It may just help you locate the problem.
http://www.3wheelerworldforums.com/postings.php?do=getip&p=198405

Here is another with a check list. ;)
http://www.3wheelerworldforums.com/postings.php?do=getip&p=59902


Howdy

For some reason I'm not privliged enough to view those links! :( What's up with that?
New2ATC
09-14-2005, 11:59 AM
I cant veiw the pages either...New2ATC, you do not have permission to access this page. This could be due to one of several reasons:
Howdy
09-14-2005, 02:38 PM
For some reason I'm not privliged enough to view those links! :( What's up with that?

Well just slap me silly! I copied the link to the IP address instead of the link to the page / post. argg

Anyhow here is the correct links:
http://www.3wheelerworldforums.com/showpost.php?p=59902&postcount=8
http://www.3wheelerworldforums.com/showpost.php?p=198405&postcount=6

Sorry about that!!
Howdy
New2ATC
09-14-2005, 03:13 PM
thanks for the help Howdy, but i got it running. It turns out that the spark plug boot was bad. I put the boot off my moped on it and pulled it and it fired right up 1st pull. Runs good smokes a little on startup, but overall good. Now all I need is the carb. rebuild kit for it and i should be golden. It only runs for a few minutes untill it dies and then i wait a little bit and it runs again for a few minutes.