Parts interchange master list (you help make it!)

[69HemiGTX]

I don't know about y'all, but I like to think that there are parts out there from other machines that will interchange with others, even if they aren't from the same manufacturer. About the only things I know are that the 85-86 250R and 83-85 200X front fenders are a direct swap, the swingarms from an 86 ATC250R and a TRX250R swap, and the Tecate-4 and Mojave gas caps are identical.

Let's get some info out here! Use this thread as a database for info. Know about a Kawasaki part that replaces a hard-to-find one for a Yamaha? List it here.

:Bounce :TrikesOwn :w00t:

[69HemiGTX]

I just found this thread (http://www.3wheelerworldforums.com/showthread.php?t=16277&highlight=tri) that lists parts for the Tri-Z.

[1stwarrior95]

1979 ATC 110 rear wheel hubs interchange with ATC 200X hubs and also most Yamaha sport quad hubs, (Warrior, Banshee, Raptor).

Bolt patterns;
ATC 110 = 3/100mm
200X = 4/110mm
Warrior, Banshee, Raptor, YFZ = 4/115mm
(Exception to above) 89-90 Banshee = 4/156mm

I have 89-90 Banshee 4/156mm hubs on my ATC 110 with Kawaski Tecate 10 in. wheels!

[Rex Karz]

The 83-84 250R axle will fit the 86-87 200X

[YAMAHA_Jim]

If you go back a few pages on this message brd you will find a few different posts on this topic.
Alot of the rear end parts on a triz will interchange with thier quads(blaster banshee warrior)not raptor and 450.Also levers,perches,throttles.

[bigpimpin]

great post

[topless]

ATC 70 uses the same sized axle hub & splines as larger ATC's, we used them from a 200s on our 70 to get the 4 lug.

[jeopardy98]

The 83-84 250R axle will fit the 86-87 200X


I just ordered one but I'm wondering if the brake parts will interchange. Also which hubs will work with the 250r axle?

Great post.

[money89tractors]

EX hubs are direct swaps to the 81R.

-Phil

[Hoosier_Daddy]

Well, I've read here that 1983 - 85 KX 250 engines are almost completely interchangeable with 84 - 85 Tecates with some minor exceptions. Also heard that using the KX cylinder is an upgrade that will help "wake up" the Tecate engine.

Other then that, I'm not sure but I hope the Tecate guys chime in with other stuff that works on an 85 Tecate because I'm restoring one and could use all the help I can get. Finding parts are impossible!

[TriMotoMan]

yt 125 and yt 175 have alot of interchangable parts and blaster rear hubs will fit tri motos rear splines so that you can have 4 lug rims

[oscarmayer]

barrel and heads from the 185/185s/200/200s/200e are all interchangeable
seat and wheels from a 81-83 185s-200s interchange only

[bmxpsyco04]

xr200 cam is interchangeable with 185/185s/200/200s/200e as well as the jug (i'm not a veteran so correct me if i'm wrong bout anything). Just bought an xr200 jug for my 185s

[oscarmayer]

is the cam on the xr200 more agressive than the 185/200s stuff? if so, i may be lookign for a xr200 cam for my 200e and 185s buildups. :devil: