Im trying to Identify the engine in my 200x

[xd 200x]

ok here is the deal bought this thing a year ago and Im trying to figure out waht engine is in it. the guy said it was a 250 but when I looked at the jug it says 192 cm and it's an auto clutch. so I figured it was a 200s but when I look at all the 200s pictures I never see an electric start, It also has a pull start. The reason I ned to figure this out is because It is smoking and I think it needs rings. and the cltchs are going cause it stumbles betwen gears and I want to get the right parts so help. also does anyone know of where another number would b on this engine to identify it.

[wheelie king]

Post a pic. You know, that thing that's worth 1000 words! My 200s has an electric start, so do not rule that out.

[chris200x]

Sounds to me like you got yourself an auto X. Post some pics or email me them and I'll resze and post them for you.

[xd 200x]

ok I'll do that tomarrow. Thats what I always thought it was but somthing just didnt feel right about it. By the way even with the bad rings this thing get air

[edog]

ok here is the deal bought this thing a year ago and Im trying to figure out waht engine is in it. the guy said it was a 250 but when I looked at the jug it says 192 cm and it's an auto clutch. so I figured it was a 200s but when I look at all the 200s pictures I never see an electric start, It also has a pull start. The reason I ned to figure this out is because It is smoking and I think it needs rings. and the cltchs are going cause it stumbles betwen gears and I want to get the right parts so help. also does anyone know of where another number would b on this engine to identify it.
Try on the the engine cases. :)

[threewheelin-feelin]

200m or ..200cc big red engine maybe?

[chris200x]

200x's are 198 Cm and have a clutch on the right hand side. And no pull start. (kicker)

[Oldshell4481]

how fast she go with that engine??

[chris200x]

There should be vin numbers on the bottom of the motor by the shifter and the cc # is on the side of the cylinder in the back.


Then #'s on my 200x are as follows: TBO5E
5249808

I'm not to sore about the 1st 8 in the bottom #... It may be a 3.

[chris200x]

just a couple more pics... does yours look like this?

[xd 200x]

ok here are the numbers that I think r there

BO6E
30182
DOES ANYONE HAVE A BOOK OR SOMTHINNG TO LOOK THIS UP IN

[Tri-ZNate]

does it have a lever for you to switch between high, low, and reverse on the left hand side? if it does then its a big red

[trikes4life]

looks like a 200m

[Tri-ZNate]

The only bo6e's that I could find were 250R's but that sure aint a 250R

[wanta250r]

Looks a lot like a normal 200x engine to me? Looks like it has a manual clutch. You can see the clutch lever and cable in the first pic. :p

[edog]

There should be vin numbers on the bottom of the motor by the shifter and the cc # is on the side of the cylinder in the back.


Then #'s on my 200x are as follows: TBO5E
5249808

I'm not to sore about the 1st 8 in the bottom #... It may be a 3.
He is just useing that as a compsarrison.

[xd 200x]

no clutch. thats not mine, I have pics if someone would give me an email to send them to ,. It dosent have a lever

[Tri-ZNate]

NNB1@epix.net

[wanta250r]

Oops, sorry. maybe its a 185 or 185s :D

[xd 200x]

sent you my pics thanks

[Tri-ZNate]

I got the pics but it might be awile till i can post em (he he dial-up dont like 4 meg :D )

[Tri-ZNate]

here is one pic I was able to get before my comp started being retarded. I had to make it my desktop by the way because when I hit save pic and the picture is already uploaded it will save like instantly, but when i tried it on these it wanted to download them all over again so I said screw it. i'll post more in the morning.

[xd 200x]

thanks I know it's a 200 cause of thw 192 on the jug but I just dont know which one

[225dx]

More than likely you have a 200es bid red motor. Does it have a hi/lo 5 speed tranny?

[freewheel3]

Looks like the starter is horizontal across the front, right? Rules out 185 , 200s & 82 plain 200 engine.
Chain drive, rules out 85-87 BR or SX.
If there is no high / low that rules out 83 BR
If there is no reverse that rules out 84 BR.
Auto clutch rules out 200x.
That leaves us with 82 BR (only because I'm not sure of a sub-trans. on them) & my guess of a 200m. Looks like black cases?

[Tri-ZNate]

ok here are the rest. its not a big red but it has a DG exhaust on it :naughty:

[Howdy]

200x's are 198 Cm and have a clutch on the right hand side. And no pull start. (kicker)

Chris, the 83-85 200x's were 192cc. ;)


looks like a 200m

You hit the nail on the head here. That is a 200m motor. No doubt about it. You can use rings or pistons from 200, 200s, 200e, 200es, and a 200m. They all innerchange. Top end gasket kits will innerchange as well. ;) ;)

Howdy

[Tri-ZNate]

oops forgot this one. Nice jump with a 200 motor.

[edog]

1983 200m motor for shure.

[xd 200x]

thanks guys alot

[xd 200x]

what o you guys think the chances are of me just puting new rings in it. It runs good I just dont like all that smoke.

[bigredhead]

The problem with that is while you have the thing apart.. you may as well do it right.

Depending on the conditinos of everything in there..... ( and you pretty much have to take it apart to tell ) .. look into a new timing chain, tensioners... have the valves checked out.. the cylinder micrometered, and then new gaskets etc... and you have a motor that will run for another 10 years solid !

[xd 200x]

howdy how much will you charge me to do this man?

[chris200x]

oops forgot this one. Nice jump with a 200 motor.


It don't matter how big the motor is for jumping.... It's what size testes you got! :lol: