my attempt at polishing.

[200x Basket]

i have about two hours in this. i need to get my dremel on it and another hour polishing. this is actually just a practice cylinder. the sleeve is busted but i wanted to practice for my cylinder. this is with a $5 3/8 drill kit from harbor freight.

[Darek]

Nice job, Thumbs up :)

[DixiePlowboy]

:shock: WOW!
That's what I'm wanting to do with my R cylinder/head. Please give me some details on exactly what bits/heads/etc... you used to get those results. Thanks in advance!

[ATCRYDER]

Props.

I dont have the patience to things that large. I'm restricted to masters, levers, bolts and forks ;)

[G-MAN-1]

VERY NICE. I DONT THINK YOU NEED THE PRACTICE BUDDY. GO FOR THE FINAL ONE ON YOURS.LIKE TO C PICS WHEN FINISHED. KEEP UP THE GOOD WORK. :D :rolleyes:

[jeswinehart]

that can be the finest busted thing i have ever seen ! heck, e-bay it as a broken peice cause i am sure it would get bids !

outstanding !

[Mobular]

How much prep work was done with emery cloth?

[BLAZERONE22]

Good job! I did my stator cover today and I thought that was work! :D

[200x Basket]

How much prep work was done with emery cloth?

none. i used a 60 grit,120 grit, 240 grit flapper wheels. i would have done it up to 600 grit by hand but i did not have any sand paper and this is just practice. i then buffed it with a sewn buffer wheel and red tripoli. the small crevices need to be finished and it would look good.

thanks for the compliments :-P

[Mobular]

I'da thought the coarse flappers would have done some gouging!
Learn something new everyday!